A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode

نویسندگان

  • Shuji Fujita
  • Shun Yamanoi
  • Kenichi Murata
  • Hiroki Mita
  • Tsunetoshi Samukawa
  • Takaaki Nakagawa
  • Hideki Sakai
  • Yuichi Tokita
چکیده

Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm(-2) without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm(-3) through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Fabrication of Glucose/O2 Enzymatic Biofuel Cell

Enzyme-based biofuel cells (EBFCs) are systems that use a variety of organic compounds to produce electricity through oxido-reductase enzymes, such as oxidase or dehydrogenase as biocatalysts immobilized on electrodes. In this study, a single-chamber EBFC consisting of carbon electrodes that operating at ambient temperature in phosphate buffer, pH 7 is reported. The EBFC anode was based on gluc...

متن کامل

Effect of membrane on power density of ethanol/O2 biofuel cell

A biofuel cell is a device for converting chemical energy to electrical energy by a simple way. A high-impact anode is prepared in this research. Here, carboxylated multiwall carbon nanotube (COOH-MWCNT), polydiallyldimethyl ammonium chloride (PDDA) and alcohol dehydrogenase were cast on modified glassy carbon with polymethylene green to construct the bioanode for ...

متن کامل

Flexible and high-performance paper-based biofuel cells using printed porous carbon electrodes.

We demonstrate a flexible paper-based biofuel cell using porous carbon inks for high power output. The power density of the fabricated biofuel cell reached 0.12 mW cm(-2) (at 0.4 V), which is the highest output power reported to date, to the best of our knowledge.

متن کامل

A three-dimensional origami-based immuno-biofuel cell for self-powered, low-cost, and sensitive point-of-care testing.

A three-dimensional microfluidic origami glucose-air immuno-biofuel cell has been successfully demonstrated for the first time to implement self-powered, sensitive, and low-cost sandwich immunoassay for cancer markers based on the signal amplifications of a porous Au-paper electrode and Au nanoparticles attached to carbon nanotubes.

متن کامل

Impact of anisotropy level of gas diffusion layer on the temperature distribution of a PEM fuel cell cathode electrode

Proton exchange membrane (PEM) fuel cells being employed in fuel cell vehicles (FCVs) are promising power generators producing electric power from fuel stream via porous electrodes. Structure of carbon paper gas diffusion layers (GDLs) applying in the porous electrodes can have a great influence on the PEM fuel cell performance and distribution of temperature, especially at the cathode side whe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2014