Numerical Study on the Effect of Ratio among Various of Submersion on Three Dimensional Velocity Components around T-shaped Spur Dike Located in a 90 Degree Bend
نویسنده
چکیده
Spur dike is one of the hydraulic structures used in rivers to protect river banks. In this paper, flow pattern around a T-shaped spur dike which is located in a 90◦ bend and different amounts of submersion has been studied using Flow-3D. Numerical results have been compared with experimental results and have been analysed.
منابع مشابه
Numerical study, investigation effect of distance and angle of spur dike on average velocity distribution and maximum velocity position at mild 90 degree bend
Use the Spur dike as one of the easiest ways to protect the costal of the river has always been of interest to River engineers.The aim of this study was numerical investigate, the effect of distance and angle of the spur dikes parameters on the pattern of distribution of average velocity and the location of maximum velocity position at a mild 90 degree bend. For this purpose used ANSYS CFX so...
متن کاملتأثیر قدرت جریان ثانویه بر تنش برشی بستر پیرامون آبشکن سرسپری مستقر در موقعیت‌های مختلف قوس 90 درجه با بسترصلب
In this study, the effect of the secondary flow strength and vorticity on variations of bed shear stress for different positions of spur dike are compared through a mild 90˚ bend along with a T-shaped spur dike in a rigid bed. To carry out these experiments, three dimensional velocimeters (ADV) have been used for measuring velocity. Moreover, a comparison has been made between velocity vectors ...
متن کاملاثر شرایط جریان و عوامل هندسی آبشکن مستغرق در پایداری ریپ‌رپ
Spur dikes are the most common hydraulic structures for river bank protection. Since the construction of this structure causes higher velocities around it, this structure is exposed to erosion. Riprap around the structure nose is one of the most common and economic way to protect spur dike. The main aim of this study is to investigate the riprap stability in a mild 90 degrees bend. Experiments ...
متن کاملبررسی آزمایشگاهی اثر شکاف در بدنه آبشکن بر کنترل آبشستگی اطراف آن در قوس 180 درجه
In this study, the performance of slot in the spur dike was evaluated as a way to reduce the scouring around the installed flat spur dike in a 180 degree bend and the development of scouring in the slotted spur dike was compared with that of the spur dike with no slot. To evaluate the effect of the slot on the development of scouring around it, a flat spur dike made of Plax Glass was installed ...
متن کاملExperimental Study of the Effect of Base-level fall at the Beginning of the Bend on Reduction of Scour around a Rectangular Bridge Pier Located in the 180 Degree Sharp Bend
Base-level fall in river beds occurs due to varying natural or unnatural causes. Base-level fall causes the change in the behavior of flow at the location of drop in base-level. In such situations, most of scour occur at the foot of the slope, and slope wall retreats in the upstream direction. This phenomenon widens the wall of the river bank, thus leading to its destruction. The amount of bed ...
متن کامل