Colorimetric characterization of a 3D printer with a spectral model
نویسندگان
چکیده
Abstract As 3D printing becomes an increasingly popular technology, knowledge of the processes employed by a printer becomes more important. In this paper, one particular printer, the Zcorp Spectrum Z510, is studied in terms of its color production. Two approaches to a spectral model are evaluated in terms of their ability to predict output colors of the printer based on input RGB values. The models and their performance are presented below.
منابع مشابه
Color Printer Characterization by 3D Triangulation
A new method for the colorimetric characterization of a printer is proposed. It can also be applied to any other type of digital image reproduction device. The method is based on a computational geometry approach. It uses a 3D triangulation technique to build a tetrahedral partition of the printer color gamut volume and it generates a surrounding structure enclosing the definition domain. The c...
متن کاملColor Printer Characterization Using a Computational Geometry Approach
We propose a method for the colorimetric characterization of a printer which can also be applied to any other type of digital image reproduction device. The method is based on a computational geometry approach. It uses a 3D triangulation technique to build a tetrahedral partition of the printer color gamut volume and it generates a surrounding structure enclosing the definition domain. The char...
متن کاملSpectral-based printer modeling and characterization
Spectral characterization involves building a model that relates the device dependent representation to the reflectance function of the printed color, usually represented with a high number of reflectance samples at different wavelengths. Look-up table-based approaches, conventionally employed for colorimetric device characterization cannot be easily scaled to multispectral representations, but...
متن کاملUse of a 3D printer to create a bolus for patients undergoing tele-radiotherapy
Background: This study describes the possibility of implementing three-dimensional printing technology to create a precise construction of a planned bolus, based on computed tomography information stored in the Digital Imaging and Communications in Medicine (DICOM) format file. Materials and Methods: To create the bolus with a 3D printer, we converted data in the DICOM format to the s...
متن کاملSpectral-Based Six-Color Separation Minimizing Metamerism
A spectral-based six-color printer model was derived in determining the six color separations for an input spectral image that yields the least metameric reproduction relative to the original. Confined by the ink-trapping limitation, the six-color halftone printer modeling effort is a union of ten four-color halftone printer modeling efforts in addition to a four-ink selector. The four-ink sele...
متن کامل