A Three-Valued D-Flip-Flop and Shift Register Using Multiple-Junction Surface Tunnel Transistors
نویسندگان
چکیده
A three-valued D-flip-flop (D-FF) circuit and a two-stage shift register built from InGaAs-based multiple-junction surface tunnel transistors (MJSTT) and Si-based metal-oxide-semiconductor field effect transistors (MOSFET) have been demonstrated. Due to the combination of the MJSTTs latching function and the MOSFETs switching function, the number of devices required for the D-FF circuit was greatly reduced to three from the thirty required for the FET-only circuit.
منابع مشابه
Performance Analysis of Reversible Sequential Circuits Based on Carbon NanoTube Field Effect Transistors (CNTFETs)
This study presents the importance of reversible logic in designing of high performance and low power consumption digital circuits. In our research, the various forms of sequential reversible circuits such as D, T, SR and JK flip-flops are investigated based on carbon nanotube field-effect transistors. All reversible flip-flops are simulated in two voltages, 0.3 and 0.5 Volt. Our results show t...
متن کاملDesign of Static Flip-Flops for Low-Power Digital Sequential Circuits
In this paper, we correlated various Master and slave flip-flops i.e., single edge triggered flipflops. The low-power flip-flops have place utmost necessary elements all the range of the constructing static or successive circuits. We accomplish the comparison for their performance, Delay, Rise time, Fall Time and Power dissipation. Because Power confide in the number of transistors in the circu...
متن کاملDesign and Analysis of Register Element for Low Power Clocking System
The register element (flip-flop) is a basic building block to design any clocking system, which consists of the clock distribution tree and flip-flops. A large portion of the on chip power is consumed by the clocking system the total power consumption of the clocking system depends on both clocking distribution tree and also the register elements (flip-flops). The power consumption of register ...
متن کاملLow –power and Area-efficient Shift Register Using Pulsed Latches
-This paper proposes a low-power and area-efficient shift register using digital pulsed latches. The area and power consumption are reduced by replacing flip-flops with pulsed latches. This method solves the timing problem between pulsed latches through the use of multiple non-overlap delayed pulsed clock signals instead of the conventional single pulsed clock signal. The shift register uses a ...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 3, Issue 09, 2015 | ISSN (online): 2321-0613
The timing elements and clock interconnection Networks such as flip-flops and latches, is One of the most power consuming components in modern very large Scale integration (VLSI) system. The area, power and transistor count will compared and designed using several latches and flip flop stages. Flip Flop is a circuit which is used to store state information. Power consumption is one of the main ...
متن کامل