Application of Pulse Plating - Amorphous Alloys
نویسنده
چکیده
Amorphous alloys can be electrodeposited by direct or pulsed current. According to electrocrystallization theory, a high crystallization overpotential produces microcrystalline structure in the deposits. Thus if the amorphous phase consists of microcrystals, pulsed current is preferable for preparing amorphous alloys. However, another newly proposed theory holds that the amorphous phase structure is microcrystalline but icosahedral. This would mean that future study is needed effect of pulsed current.
منابع مشابه
Pulse Plating of Soft High Magnetic Moment Materials-Properties and Application
In this paper, we present recent results obtained for pulse plating of 1.8 T CoNiFe alloy. As a starting point, a comprehensive model is developed that explains and mathematically describes the phenomenon of pole tip depression observed in the case of direct current deposition. Based on this model and its results the parameters like pulse time, rest time, and magnitude of the pulse current jpp ...
متن کاملMicrostructure and composition of pulse plated Re–Ni alloys on a rotating cylinder electrode
The effect of pulse electrodeposition parameters on the composition and microstructure of Ni–Re alloys were studied on a rotating cylinder electrode. Ni–Re alloys were deposited from a citrate bath where the nickel-to-rhenium ratio was 45:1. The composition of the deposited alloy was monitored by energy dispersive spectroscopy (EDS) and compared to a single component transport-based model descr...
متن کاملElectroplating of Ni4W
Nickel-tungsten alloys were electrodeposited on stationary working electrodes from a nickel sulfate, sodium tungstate, and tri-sodium citrate-based bath under different operating conditions. The microstructure of the deposits was studied by X-ray diffraction, the morphology by scanning electron microscopy and atomic force microscopy, and the approximate composition by energy dispersive spectros...
متن کاملEffect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملFabrication of Super Invar Micro- and Nano- Structures by Electrodeposition for Low Thermal Expansion Applications
5 wt % Co, are of both theoretical research and practical interest due to the anomalous codeposition behavior, the preferential deposition of less noble metal, and to the material's low coefficient of thermal expansion, CTE. A better understanding of anomalous codeposition allows for controlling the deposition rates of individual Fe, Ni, and Co metal during codeposition and hence the compositio...
متن کامل