Electrical Properties of Intermediate Band (IB) Silicon Solar Cells Obtained by Titanium Ion Implantation

نویسندگان

  • Helena Castán
  • Eduardo Pérez
  • Héctor García
  • Salvador Dueñas
  • Luis Bailón
  • Javier Olea
  • David Pastor
  • Eric García-Hemme
  • Maite Irigoyen
  • Germán González-Díaz
چکیده

Intermediate band silicon solar cells have been fabricated by Titanium ion implantation and laser annealing. A two-layer heterogeneous system, formed by the implanted layer and by the unimplanted substrate is obtained. In this work we present electrical characterization results which evidence the formation of the intermediate band on silicon when ion implantation dose is beyond the Mott limit. Clear differences have been observed between samples implanted with doses under or over the Mott limit. Samples implanted under the Mott limit have capacitance values much lower than the non-implanted ones as corresponds to a highly doped semiconductor Schottky junction. However, when the Mott limit is surpassed the samples have much higher capacitance, revealing that the intermediate band is formed. The capacitance increase is due to the big amount of charge trapped at the intermediate band, even at low temperatures. Titanium deep levels have been measured by Admittance Spectroscopy. These deep levels are located at energies which vary from 0.20 to 0.28 eV bellow the conduction band for implantation doses in the range 10-10 at/cm. For doses over the Mott limit the implanted atoms become non recombinant. Admittance measurements are the first experimental demonstration the Intermediate Band is formation. Capacitance voltage transient technique measurements prove that the fabricated devices consist of two-layers, in which the implanted layer and the substrate behave as an n/n junction.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of Thermalisation Loss in the Quantum Dot Solar Cells using a Finite Element Method

As thermalisation loss is the dominant loss process in the quantum dot intermediate band solar cells (QD-IBSCs), it has been investigated and calculated for a QD-IBSC, where IB is created by embedding a stack of InAs(1-x) Nx QDs with a square pyramid shape in the intrinsic layer of the AlPySb(1-y) p-i-n structure. IB, which is an optically coupled but electrically isolated mini-band, divides th...

متن کامل

Distinct enhancement of sub-bandgap photoresponse through intermediate band in high dose implanted ZnTe:O alloys

The demand for high efficiency intermediate band (IB) solar cells is driving efforts in producing high quality IB photovoltaic materials. Here, we demonstrate ZnTe:O highly mismatched alloys synthesized by high dose ion implantation and pulsed laser melting exhibiting optically active IB states and efficient sub-gap photoresponse, as well as investigate the effect of pulsed laser melting on the...

متن کامل

Aluminum–Titanium Alloy Back Contact Reducing Production Cost of Silicon Thin-Film Solar Cells

In this study, metal films are fabricated by using an in-line reactive direct current magnetron sputtering system. The aluminum–titanium (AlTi) back contacts are prepared by changing the pressure from 10 mTorr to 25 mTorr. The optical, electrical and structural properties of the metal back contacts are investigated. The solar cells with the AlTi had lower contact resistance than those with the ...

متن کامل

Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics

Nanowires (NWs) are recently used in several sensor or actuator devices to improve their ordered characteristics. Silicon nanowire (Si NW) is one of the most attractive one-dimensional nanostructures semiconductors because of its unique electrical and optical properties. In this paper, silicon nanowire (Si NW), is synthesized and characterized for application in photovoltaic device. Si NWs are ...

متن کامل

Recombination Lifetime in an Intermediate Band Structure

Considerable interest in Quantum Dot (QD) and Intermediate Band (IB) structures has evolved in recent years principally because of the new physical properties that ensue from the modified band structure of the semiconductor material. In particular new devices may take advantage of these new properties and when applied to solar cells there is a further challenge to characterise the structure in ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012