Continuous Jetting of Alginate Microfiber in Atmosphere Based on a Microfluidic Chip

نویسندگان

  • Junyi Zhao
  • Wei Xiong
  • Ning Yu
  • Xing Yang
چکیده

We present a method based on a microfluidic chip that produces continuous jetting of alginate microfiber in the atmosphere to facilitate its collection and assembly. Through the analysis of the factors influencing the microfiber jetting, the principle and some microfluidic chip design criteria are discussed. A special nozzle is designed near the chip outlet, and deionized water is introduced into the microchannel through the nozzle to increase the flux and thus to prevent drop formation around the outlet which impedes the continuous jetting of microfiber. The experiments have reported the effectiveness of the proposed structure and shown that the introduction of sheath flow promotes the stability of the flow field in the microchannel and does not affect the morphology of microfiber. Simulations of velocity and pressure distribution in the microchannel are also conducted. Further, the jetting microfibers are collected and assembled into various 3D complex fiber-based macroscopic structures through patterning or reeling. Since the proposed structure is rather simple and can be easily integrated into other complex structures without adding more soft-lithographical steps, microfibers with various morphology and function can be synthesized and collected in a single chip, which can be applied to various fields, such as tissue engineering, biotechnology, and drug discovery.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Novel PDMS cylindrical channels that generate coaxial flow, and application to fabrication of microfibers and particles.

In this paper, we introduce a novel cylindrical channel that generates coaxial flow without using glass microcapillary or complicated silicon processing, and we demonstrate the fabrication of microparticles and microfibers using this channel. The simple fabrication process for cylindrical channels employs the deflection of free-standing thin PDMS membranes. Using this channel, alginate micropar...

متن کامل

A Microfluidics Based 3d Bioprinter with On-the-fly Multimaterial Switching Capability

This work details the development of a novel 3D (3-dimensional) printing system for use in the fabrication of complex biological tissue constructs. The printing system incorporates a microfluidic print head that uses coaxial flow focusing to generate, crosslink, and dispense a microfiber of sodium alginate, and a 3D positioning system to pattern the dispensed microfiber using fused filament fab...

متن کامل

Using a microfluidic chip and internal gelation reaction for monodisperse calcium alginate microparticles generation.

In this paper, the manipulation of monodisperse Ca-alginate microparticles using a microfluidic chip and a reaction of internal gelation is presented. Our strategy is based on the sheath focusing effect to form uniform water-in-oil (w/o) emulsions in the cross-junction microchannel. These fine emulsions, consisting of 1.5 % w/v Na-alginate and 1.0 % w/v calcium carbonate, are then dripped into ...

متن کامل

Investigation of Mass Transfer Coefficient under Jetting Conditions in a Liquid-Liquid Extraction System

In this research mass transfer coefficient under jetting regime in different directions (from dispersed to continuous and continuous to dispersed phase) has been studied using an experimental setup. n-Butanol-succinic acid-water with low interfacial tension has been selected as experimental chemical system. The effects of various parameters such as jet velocity, nozzle diameter and the heig...

متن کامل

Controllable generation and encapsulation of alginate fibers using droplet-based microfluidics.

Herein we demonstrate the segmentation of alginate solution streams to generate alginate fibers of precisely controllable lengths between 200 and 1000 μm. Moreover, we demonstrate the subsequent encapsulation of the formed fibers within pL-volume microdroplets, produced within the same microfluidic device, in a direct manner. Finally, we show immediate and complete on-chip gelation of alginate ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017