Instability of Deformation
نویسندگان
چکیده
This chapter addresses the mechanisms by which instabilities can develop in rocks in the nominally ductile regime under conditions that the authors believe are relevant to Earth. We will not address brittle failure or frictional sliding processes in detail, but much of our discussion will be couched in terms of knowledge gained in studies of these processes. As a consequence, we will begin by discussing why brittle failure and frictional sliding cannot be the mechanism by which rocks become unstable at depth, despite the strong evidence that they are the underlying mechanism of earthquakes at shallow depths (e.g., Scholz 1990, 2002).
منابع مشابه
Efficient Higher-Order Shear Deformation Theories for Instability Analysis of Plates Carrying a Mass Moving on an Elliptical Path
The dynamic performance of structures under traveling loads should be exactly analyzed to have a safe and reasonable structural design. Different higher-order shear deformation theories are proposed in this paper to analyze the dynamic stability of thick elastic plates carrying a moving mass. The displacement fields of different theories are chosen based upon variations along the thickness as c...
متن کاملFailure Prediction during uniaxial Superplastic Tension using Finite Element Method
Superplastic materials show a very high ductility. This is due to both peculiar process conditions and material intrinsic characteristics. However, a number of superplastic materials are subjected to cavitation during superplastic deformation. Evidently, extensive cavitation imposes significant limitations on their commercial application. The deformation and failure of superplastic sheet metals...
متن کاملDynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method
The dynamic instability regions of composite laminated skew flat plates subjected to uniform in-plane axial end-loading are investigated. The in-plane loading is assumed as a combination of a time-invariant component and a harmonic time-varying component uniformly distributed along two opposite panel ends’ width. In case of some loading frequency-amplitude pair-conditions, the model is subjecte...
متن کاملPrediction of Instability in Planar Anisotropic Sheet Metal Forming Processes
In this paper instability of planar anisotropic sheet metal during a few forming processes is investigated for the first time. For this reason components of the constitutive tangent tensor for planar anisotropic sheets are developed. By using the above tensor location of necking is predicted. Direction of the shear band is also predicted using the acoustic tensor. A finite element program is pr...
متن کاملInfluence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates
In this article, vibration characteristics and the parametric instability of functionally graded material (FGM) plates with cyclic loading in a hygrothermal field are discussed. The plate element is modeled in a finite element by applying the third-order shear deformation hypothesis. The mathematical formulation of the FGM plate is made with two material constituents by applying the power rule ...
متن کاملNonlinear Vibration and Instability Analysis of a PVDF Cylindrical Shell Reinforced with BNNTs Conveying Viscose Fluid Using HDQ Method
Using harmonic differential quadrature (HDQ) method, nonlinear vibrations and instability of a smart composite cylindrical shell made from piezoelectric polymer of polyvinylidene fluoride (PVDF) reinforced with boron nitride nanotubes (BNNTs) are investigated while clamped at both ends and subjected to combined electro-thermo-mechanical loads and conveying a viscous-fluid. The mathematical mode...
متن کامل