Mechanical reaction of the frontal abdominal wall to the impact load during gravidity.

نویسندگان

  • Karel Jelen
  • Antonín Dolezal
چکیده

THE AIM OF THE STUDY Selected parameters of mechanical characteristics of the gravid abdomen under impact load. TYPE OF THE STUDY Experimental biomechanical study carried out in a human in vivo. METHOD Damped vibration of the gravid abdomen was detected after a defined impact load using speed cinematographic recording of 103 pictures/sec. A women in 32nd week of gestation, performing toe stand and fall down to the heel, the drop was 0.08 m. The recording was digitalized and the values mathematically analysed. The method used was PAM (polynomial approximation method) of approximation of discrete coordinates. The umbilikus' trajectory in reaction to the impact load was described analytically and interpreted graphically. Parameters of abdomen vibration were detected in horizontal profile by tensometric belt. Impact in interaction of soles with the underlay was detected with the help of tensometric platform Kistler. Ultimate strength point of myometrium was set by tearing experiment in 12 samples. RESULTS Calculation of characteristics of damped, aperiodic vibration of hydro-viscous elastic system as the outside behaviour of the gravid abdomen. Parameters in vertical direction of umbilicus: impulse in abdominal area - 2,72 Ns, T-period - 0.1299 s, amplitude - 0,009 m, frequency - 7,7 Hz, functional damping - from -6 to +12 Nsm-1. In horizontal direction: frequency 5,4 Hz, damping 123 Nsm-1. Impact in soles' sphere 40 Ns with maximum value 1511 N, which represents level 2,2 G. Ultimate strength point of myometrium is 0,1 - 1,1 MPa. CONCLUSION The results show one of the possible critical, risky frequencies of the gravid abdomen, that is, in this concrete case, the frequency of the vibrating system of cca 7,7 Hz in vertical direction and cca 5,4 Hz horizontally. This implies that e.g. this frequency is dangerous (possible abruptio placentae) and is necessary to be avoided e.g. when travelling by means of public transportation. The applied analytic methods and presented parameters will be used for e.g. modelling the examined gravid system under impact load of a general character--locomotion, work-load, car accidents, etc.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of Pulsatile Non-Newtonian Blood Flow Through Abdominal Aorta and Renal Arteries Incorporating Fluid- Structure Interaction

Background: The interaction between the blood and the vessel wall is of great clinical interest in studying cardiovascular diseases, the major causes of death in developed countries.Objective: To understand the effects of incorporating fluid-structure interaction into the simulation of blood flow through an anatomically realistic model of abdominal aorta and renal arteries reconstructed from CT...

متن کامل

Hopper Wall Simulation in ANSYS to Determine Displacement Due to Single Ball Impact

Deformation of the silo wall due to the single ball impact is modeled in ANSYS. The material in silo, as a Winkler bed, is replaced by spring-damper elements and the spring stiffness and damper coefficients are evaluated of the granular material and wall properties. The granular material deformation under the specified force is measured to evaluate the granular stiffness to be used for determin...

متن کامل

Modeling of Vertical Breakwater Wall under Bilateral Seawater Load

Floating breakwaters are widely used due to their various advantages over stationary breakwaters. Lots of researches have been done on hydrodynamics and the type of bracing of these kinds of structures in recent years. In this study, numerical modeling of stresses caused by collision waves has been investigated. For this purpose, samples of floating breakwaters have been modeled in ANSYS softwa...

متن کامل

Severe Impact on the Behavior of Energy Absorbing Cylindrical Base in Frontal Impact

In this paper, the vibration characteristics of multi-layer shell that internal and external surfaces with a layer of piezoelectric sensor and actuator is investigated. The backrest shell laminated with simple analytical method to evaluate and the results were compared with results obtained by other researchers. The numerical solution methods (GDQ) for shells with piezoelectric layers and plain...

متن کامل

Influence of Elastic Support on the Energy Absorption in Front Crash Ductile Failure Criterion

Thin-walled structures like crash boxes may be used as energy absorption members in automotive chassis. There have been many studies addressing the behaviors of energy absorption members on frontal crash. These researches have attempted to predict the energy absorption and maximum impact load in shell structures. The energy absorption and maximum impact load depend on many parameters including ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Neuro endocrinology letters

دوره 24 1-2  شماره 

صفحات  -

تاریخ انتشار 2003