The Effect of Surface Roughness on the Radiative Properties of Patterned Silicon Wafers
نویسندگان
چکیده
The radiative properties of patterned silicon wafers have a major impact on the two critical issues in rapid thermal processing (RTP), namely wafer temperature uniformity and wafer temperature measurement. The surface topography variation of the die area caused by patterning and the roughness of the wafer backside can have a significant effect on the radiative properties, but these effects are not well characterized. We report measurements of room temperature reflectance of a memory die, logic die, and various multilayered wafer backsides. The surface roughness of the die areas and wafer backsides is characterized using atomic force microscopy (AFM). These data are subsequently used to assess the effectiveness of thin film optics in providing approximations for the radiative properties of patterned wafers for RTP applications.
منابع مشابه
Effect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel
In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...
متن کاملOptimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution
In this paper, the morphology of chemically etched silicon with various concentration is reported. The surface of Silicon (100) has pyramidal structures which can be used for anti-reflection applications in solar cells. Pyramidal structures can capture incident sun light therefore can enhance the efficiency of silicon solar cells. The structure of silicon pyramid was studied using scanni...
متن کاملStructural and optical properties of n- type porous silicon– effect of etching time
Porous silicon layers have been prepared from n-type silicon wafers of (100) orientation. SEM, FTIR and PL have been used to characterize the morphological and optical properties of porous silicon. The influence of varying etching time in the anodizing solution, on structural and optical properties of porous silicon has been investigated. It is observed that pore size increases with etching tim...
متن کاملStudy on tool wear and surface roughness in end milling of particulate aluminum metal matrix composite: Application of response surface methodology
Metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. However, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (SiCp).In the present study, an attempt has been made to investigate the influence of spindle speed (N), feed rate...
متن کاملFusion bonding of rough surfaces with polishing technique for silicon micromachining
Surface roughness is one of the crucial factors in silicon fusion bonding. Due to the enhanced surface roughness, it is almost impossible to bond wafers after KOH etching. This also applies when wafers are heavily doped, have a thick LPCVD silicon nitride layer on top or have a LPCVD polysilicon layer of poor quality. It has been demonstrated that these wafers bond spontaneously after a very br...
متن کامل