Integrating Disparate Analytical Instrumentation into an Automated Process Control System Used in Cell Culture Process Development
نویسندگان
چکیده
This case study of a cell culture process development lab shows how various common analytical instruments were quickly and effectively integrated into a comprehensive process control and data management system. Streaming time-stamped results from these instruments directly into the process control system enabled automated real-time feedback and advanced characterizations of cell viability, instead of being limited to off-line, post-run analysis. Under the FermWorks process control and data management software, drivers for instruments such as Cedex Cell Analyzer, YSI 2700 Biochemistry Analyzer, Bayer Blood Gas Analyzer and several other custom-made analytical instruments were easily added to the existing network of bioreactors and their hardware controllers (DCUs). Copyright © 2007 IFAC
منابع مشابه
Development and application of an automated, multiwell plate based screening system for suspension cell culture
Introduction The already presented automated, multiwell plate (MWP) based screening system for suspension cell culture is now routinely used in process development. It is characterized by a fully automated workflow with integrated analytical instrumentation and uses shaken 6-24 well plates as bioreactors which can be run in batch and fed-batch mode with a capacity of up to 384 reactors in paral...
متن کاملArtificial Intelligence for Inferential Control of Crude Oil Stripping Process
Stripper columns are used for sweetening crude oil, and they must hold product hydrogen sulfide content as near the set points as possible in the faces of upsets. Since product quality cannot be measured easily and economically online, the control of product quality is often achieved by maintaining a suitable tray temperature near its set point. Tray temperature control method, however, is n...
متن کاملProcess Capability Studies in an Automated Flexible Assembly Process: A Case Study in an Automotive Industry
Statistical Process Control (SPC) methods can significantly increase organizational efficiency if appropriately used. The primary goal of process capability studies is to obtain critical information about processes to render them even more effective. This paper proposes a comprehensive framework for proper implementation of SPC studies, including the design of the sampling procedure and interva...
متن کاملModeling and development of a decision support system for supplier selection in the process industry
This paper presents the development of a model based decision support system with a case study on solving the supplier selection problem in a chemical processing industry. For the evaluation and selection of supplier, the analytical hierarchy process (AHP) and grey relational analysis (GRA) were used. The intention of the study is to propose an appropriate platform for process industries in ...
متن کاملPerformance evaluation of the croissant production line with reparable machines
In this study, the analytical probability models for an automated serial production system, bufferless that consists of n-machines in series with common transfer mechanism and control system was developed. Both time to failure and time to repair a failure are assumed to follow exponential distribution. Applying those models, the effect of system parameters on system performance in actu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007