Condition Indicators for Gears
ثبت نشده
چکیده
Diagnostics of faults in gears requires development of reliable condition indicators. A large number of condition indicators, which are based on statistical moments of the synchronous average and its derivatives (difference and residual signals) were previously suggested. This study evaluates the efficiency of different gear condition indicators that are based on statistical moments and compares them with two new types of condition indicators that are suggested. The two new types of condition indicators are based on the order spectrum and the spectral kurtosis of the synchronous average. The study was conducted on the labeled data of PHM'09 challenge. This data included recordings of vibrations in helical and spur gearboxes with seeded faults.
منابع مشابه
Gear Health Threshold Setting Based On a Probability of False Alarm
There is no established threshold or limit for gear vibration based condition indicators (CI) that indicates when a gear is in need of maintenance. The best we can do is set CI thresholds statistically, based on some small probability of false alarm. Further, to the best of our knowledge, there is no single CI that is sensitive to every failure mode of a gear. This suggests that any condition b...
متن کاملAN INTELLIGENT FAULT DIAGNOSIS APPROACH FOR GEARS AND BEARINGS BASED ON WAVELET TRANSFORM AS A PREPROCESSOR AND ARTIFICIAL NEURAL NETWORKS
In this paper, a fault diagnosis system based on discrete wavelet transform (DWT) and artificial neural networks (ANNs) is designed to diagnose different types of fault in gears and bearings. DWT is an advanced signal-processing technique for fault detection and identification. Five features of wavelet transform RMS, crest factor, kurtosis, standard deviation and skewness of discrete wavelet co...
متن کاملNew condition monitoring procedure for lifting cranes using motor current signal analysis
Vibration analysis does not cover all defects able to affect a rotating machine, including those that induce torque or instantaneous rotation speed fluctuations. Indeed the vibrational energy contributions of this type of defects such as a natural and gradual degradation of the gears are often weak. Therefore the appearance of these defects is very difficult to detect from the vibrational energ...
متن کاملVibration Analysis Techniques for Gearbox Diagnostic: a Review
Gears are important element in a variety of industrial applications such as machine tool and gearboxes. An unexpected failure of the gear may cause significant economic losses. For that reason, fault diagnosis in gears has been the subject of intensive research. Vibration signal analysis has been widely used in the fault detection of rotation machinery. The vibration signal of a gearbox carries...
متن کاملInfluence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کامل