Acoustic emission and released seismic energy
نویسنده
چکیده
Intense crises of crustal stress appear to cross large regions, and to precede by several months the eventual occurrence of some strong earthquake within them. The phenomenon is not linear, and the stress control reflects some wide scale-size rather than local effects. The stress propagation through the crust can be effectively monitored by means of acoustic emission (AE) techniques (ultrasounds). The correlation is here investigated between crustal stress crises and the total release of seismic energy within some space domain around the AE recording site. Some clear inferences can be envisaged, although a significant diagnosis of the state of the crust within a given region ought to request arrays of simultaneously operated AE recorders. Some case histories are described dealing with the Italian peninsula and with the Cephallonia Island.
منابع مشابه
Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method
In this study, the longitudinal and hoop tensile strengths of an industrial ±55° Glass Reinforced Epoxy (GRE) pipe with eighteen layers as well as the associated failure mechanisms are determined. To obtain the longitudinal and hoop tensile strengths values, three specimens are cut from the studied GRE pipe in each direction. A comparison is done between both the strength values, and the fractu...
متن کاملHealth Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملSeismic noise emission induced by seismic waves
The in situ rock undergoing different kinds of deformation accumulates elastic energy that can be released spontaneously o r under artificial effect. Triggering of energy can also be performed by means of a dynamic excitation caused by elastic waves. W e carried out special field investigations with the use of seismic vibrators (Vibroseis-like sources) to study the effect of the energy release ...
متن کاملStudy of Damaged Zone around Circular Opening Using Acoustic Emission Technique
One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...
متن کاملOn the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization
A series of tests have been conducted to investigate fatigue damage characterization in corroded welded steel plates using structural health monitoring (SHM) techniques. Acoustic Emission (AE) is a non-destructive testing (NDT) technique with potential applications for locating and monitoring fatigue cracks in service. In the present work, AE is implemented to characterize damage during crack e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005