Self-assembled InAs quantum wire lasers on „001...InP at 1.6 m

نویسندگان

  • F. Suárez
  • D. Fuster
  • L. González
  • Y. González
  • J. M. García
  • M. L. Dotor
چکیده

In this work, the authors present results on the growth by atomic layer molecular beam epitaxy and characterization of lasers with one and three stacked layers of InAs quantum wires QWRs as active zone and aluminum-free waveguides on 001 InP substrates. The separated confinement heterostructure consists of n-p InP claddings and a waveguide formed by short period superlattices of InP 5 / GaInAs 4 lattice matched to the InP substrate. The optimum growth conditions substrate temperature and As and P pressures have been determined to obtain waveguides with a flat surface in order to get a uniform QWR distribution. Lasing emission is observed at a wavelength of 1.66 m up to 270 K from 15 3000 m2 devices, with a threshold current density at that 2 temperature of 2 kA/cm . © 2006 American Institute of Physics. DOI: 10.1063/1.2335775

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Localization effects on recombination dynamics in InAs/InP self-assembled quantum wires emitting at 1.5μm

Articles you may be interested in Raman study of self-assembled InAs/InP quantum wire stacks with varying spacer thickness We have studied the temperature dependence of the photoluminescence of a single layer of InAs/ InP(001) self-assembled quantum wires emitting at 1.5 lm. The non-radiative mechanisms responsible for the quenching of the emission band have been identified. The exciton dynamic...

متن کامل

Initial stages of self-assembled InAs/InP(001) quantum wire formation

In this work we explore the first stages of quantum wires (QWRs) formation studying the evolution of the growth front for InAs coverage below the critical thickness, θc, determined by reflection high energy electron diffraction. Our results show that at a certain InAs coverage θ(InAs) < θc, the elastic relaxation process starts by spontaneous formation of isolated quantum wires that evolves tow...

متن کامل

Isolated self-assembled InAs/InP(001) quantum wires obtained by controlling the growth front evolution.

In this work we explore the first stages of quantum wire (QWR) formation studying the evolution of the growth front for InAs coverages below the critical thickness, theta(c), determined by reflection high energy electron diffraction (RHEED). Our results obtained by in situ measurement of the accumulated stress evolution during InAs growth on InP(001) show that the relaxation process starts at a...

متن کامل

Emission wavelength engineering of InAs/InP(001) quantum wires

In this work we have studied the dependence of the optical properties of self-assembled InAs quantum wires (QWr) grown on InP(001) on the growth temperature of the InP cap layer, as a mean for controlling the InAs QWr size. Our main result is that we can tune the emission wavelength of InAs QWr either at 1.3 μm or 1.55 μm at room temperature. We suggest that the role of growth temperature is to...

متن کامل

Controllable growth of semiconductor nanometer structures

Self-assembled quantum dots and wires were obtained in the InxGa1-xAs/GaAs and InAs/In0.52Al0.48As/InP systems, respectively, using molecular beam epitaxy (MBE). Uniformity in the distribution, density, and spatial ordering of the nanostructures can be controlled to some extent by adjusting and optimizing the MBE growth parameters. In addition, some interesting observation on the InAs wire alig...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006