A two-component polymeric optode membrane based on a multifunctional ionic liquid.
نویسندگان
چکیده
This work details the use of a 2-component optode membrane which is capable of generating three distinct colours in the presence of Cu(2+) and Co(2+) ions. It has been found that the ionic liquid (IL) trihexyltetradecylphosphonium dicyanamide [P(6,6,6,14)][DCA] can act as plasticizer, ligand and transducer dye when used in poly(vinyl chloride) (PVC) membranes, which significantly simplifies the optode membrane cocktail. Upon exposure to an aqueous Cu(2+) solution, a yellow colour is generated within the membrane, while exposure to an aqueous Co(2+) solution generates a blue colour. Exposure to a solution containing both ions produces a green colour. Vibrational spectroscopy has been used to investigate the molecular basis of the IL-metal ion the binding mechanism. Analytical characteristics of the membranes including the effect of interfering ions, binding constants and the limit of detection for both ions have been estimated. Finally the case of simultaneous dual-analyte recognition is presented based on two distinct absorption maxima.
منابع مشابه
Design and Evaluation of a Mercury (II) Optode Based on Immobilization of 5, 6 Di methyl -1- (4 methyl benzyl) -2- para tolyl-1H-benzimidazole (DMBPTBI) on a Triacetylcellulose Membrane and Determination in Various Samples
The characterization of an optical sensor membrane is described for the determination of Hg2+ ions based on the immobilization of 5, 6 Di methyl -1- ( 4 methyl benzyl) -2- para tolyl-1H-benzimidazole (DMBPTBI) on a triacetylcellulose membrane. The membrane responds to mercury ions by changing color reversibly from orange to red in universal buffer solution at pH 2. Under optimum conditions, the...
متن کاملConstruction of an optical sensor for the determination of ascorbic acid using ionic liquids as modifier.
An optode was designed for an indirect determination of ascorbic acid by using neocuproine, which has been coated on transparent triacetylcellulose film as a membrane. The proposed method is based on the oxidation of ascorbic acid to dehydroascorbic acid with the Cu(II) and neocuproine reagent. The increase in the absorbance value of the optode at the maximum wavelength of 455 nm was related ...
متن کاملRegeneration of СO2 Physical Solvents at Elevated Pressures in Gas-Liquid Membrane Contactor
In the present work, a membrane contactor with asymmetric flat-sheet poly(vinyltrimethylsilane) (PVTMS) membranes was proposed for the CO2 desorption process from physical solvents at elevated trans-membrane pressures. Different solvents were studied: water, a mixture of polyethylene g...
متن کاملApplication of a mesoporous nanomaterial based on basic ionic liquid anchored to silica as a highly effective catalyst for the production of 2-amino-4H-chromenes
This research describes application of a mesoporous nanostructured material based on basic ionic liquid anchored to silica, i.e. nano-2-(dimethylamino)-N-(silica-n-propyl)-N,N-dimethylethanaminium chloride {nano-[DMSPDE][Cl]}, as a highly effective and heterogeneous nanocatalyst for the production of 2-amino-4H-chromenes. The one-pot multi-component ...
متن کاملFailure Mechanisms of Hollow Fiber Supported Ionic Liquid Membranes
Hollow fiber supported ionic liquid membranes (SILMs) were tested using the bubble point method to investigate potential failure modes, including the maximum transmembrane pressure before loss of the ionic liquid from the support. Porous hollow fiber supports were fabricated with different pore morphologies using Matrimid(®) and Torlon(®) as the polymeric material and 1-hexyl-3-methylimidalzoli...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- The Analyst
دوره 136 2 شماره
صفحات -
تاریخ انتشار 2011