Numerical noise generation in modelled bearing vibration signals
نویسندگان
چکیده
A two-dimensional (2-D) explicit dynamics finite element (FE) model of a rolling element bearing was solved using a commercial FE software package, LS-DYNA. It was found that the modelled bearing vibration signals contain a significant amount of numerical noise. This paper provides an explanation of the physical mechanism by which the numerical noise is generated. The noise frequencies were analytically estimated and filtered out to achieve comparatively clean vibration signals and rolling element-to-raceway contact forces.
منابع مشابه
Dynamic Behaviour of Ball Bearing Applications with Constrained Damping Layers
Rolling bearing noise has become an aspect of increasing importance for the performance of rotating machinery, like electric motors and gearboxes. Generally, two aspects are important with regard to bearing noise, i.e. the transmission characteristics and the vibration generation characteristics. A potential source of vibrations are for example manufacturing imperfections of the di erent bearin...
متن کاملRolling Element Bearing Vibration – Generation and Significance
Rolling bearings are one of the most important noise and vibration generator into mechanical constructions. Therefore, it is very important to have knowledge of the rolling element bearings influence on the level of noise and vibration in this systems. This paper deals with a basic forms for generation of vibration and noise of rolling element bearing and suggestions of vibration analysis signi...
متن کاملRolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm
This paper focuses on the problem of accurate Fault Characteristic Frequency (FCF) estimation of rolling bearing. Teager-Kaiser Energy Operator (TKEO) demodulation has been applied widely to rolling bearing fault detection. FCF can be extracted from vibration signals, which is pre-treatment by TEKO demodulation method. However, because of strong noise background of fault vibration signal, it is...
متن کاملMethod for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect
Bearing defects are one of the most important mechanical sources for vibration and noise generation in machine tool spindles. In this study, an integrated finite element (FE) model is proposed to predict the vibration responses of a spindle bearing system with localized bearing defects and then the sensor placement for better detection of bearing faults is optimized. A nonlinear bearing model i...
متن کاملBearing Fault Diagnosis Based on Vibration Signals
The vibration signal obtained from operating machines contains information relating to machine condition as well as noise. Further processing of the signal is necessary to elicit information particularly relevant to bearing faults. Many techniques have been employed to process the vibration signals in bearing faults detection and diagnosis. Two common techniques, time domain techniques and freq...
متن کامل