Strength and Stiffness of Spliced Nail-Laminated Posts Part 2: Testing and Design Procedures

نویسنده

  • Russell C. Moody
چکیده

Dave Bohnhoff is an Assistant Professor in the Agricultural Engineering Department at the University of Wisconsin-Madison. He teaches courses in Agricultral Structures and Environment, Metal Building Systems, and Residential Construction. The majority of his research has involved computer modeling and laboratory testing of mechanically-laminated posts and mechanical fasteners in wood. He is very active in local, state and national ASAE activities, and currently chairs the committee which is reviewing the ASAE snow and wind load standard.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structural Tests of Concrete Composite - Cross - Laminated Timber Floors Final Report

Experimental tests of a composite concrete-cross-laminated timber (CLT) floor system were conducted. The floor system was constructed with 5-ply CLT panels (6.75 in. thick) made composite with a 2.25 in. thick reinforced concrete topping slab. Four series of tests were performed using different specimen configurations and laboratory testing methods. Tests included: (1) Comparative one-way bendi...

متن کامل

بررسی مقایسه ای مقاومت به شکست سه نوع پست مختلف در بازسازی دندانهای اینسایزور شیری به شدت تخریب شده

Introduction & Objective: The management of mutilated primary incisors in early childhood caries is a clinical challenge. This study's purpose was to compare the resistance strength of 3 different types of posts in restoring broken primary incisors: (1) composite posts, (2) ortho-dontic wire posts and (3) quartz fiber posts. Materials & Methods: This semi experimental in vitro study was perfo...

متن کامل

Comparison of Stiffness and Failure Behavior of the Laminated Grid and Orthogrid Plates

The present paper investigates the advantages of a new class of composite grid structures over conventional grids. Thus far, a known grid structure such as orthogrid or isogrid has been used as an orthotropic layer with at most in-plane anisotropy. The present laminated grid is composed of various numbers of thin composite grid layers. The stiffness of the structure can be adjusted by choosing ...

متن کامل

The Effect of Resin Cement Type and Cementation Technique on Bond Strength of Fiber Posts

Background: Resin cements are widely used for cementation of FRC posts, but their bond strength can be influenced by cement type and cementation technique. The aim of this study was to determine the effect of type of resin cement and cementation technique on the bond strength of fiber posts. Methods: Forty five extracted mandibular premolars with a minimum roo...

متن کامل

Measurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole

In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1997