An integrated capacitance bridge for high-resolution, wide temperature range quantum capacitance measurements.
نویسندگان
چکیده
We have developed a highly sensitive integrated capacitance bridge for quantum capacitance measurements. Our bridge, based on a GaAs HEMT amplifier, delivers attofarad (aF) resolution using a small AC excitation at or below k(B)T over a broad temperature range (4-300 K). We have achieved a resolution at room temperature of 60 aF/√Hz for a 10 mV ac excitation at 17.5 kHz, with an improved resolution at cryogenic temperatures, for the same excitation amplitude. We demonstrate the utility of our bridge for measuring the quantum capacitance of nanostructures by measuring the capacitance of top-gated graphene devices and cleanly resolving the density of states.
منابع مشابه
Integrated Capacitance Bridge An integrated capacitance bridge for high-resolution, wide temperature range quantum capacitance measurements
An integrated capacitance bridge for high-resolution, wide temperature range quantum capacitance measurements Arash Hazeghi, 2 Joseph A. Sulpizio, 3 Georgi Diankov, David Goldhaber-Gordon, a) and H.S. Philip Wong These authors contributed equally to this work Department of Electrical Engineering, Stanford University Department of Physics, Stanford University Department of Chemistry, Stanford Un...
متن کاملTraceability Chain of the Capacitance Unit to Quantum Hall Effect at Inmetro - Four-terminal Coaxial Bridge
− This paper describes the development of a four-terminal coaxial bridge, part of the traceability chain of the capacitance unit to the quantum Hall effect, in construction at Inmetro. This bridge will also be used to calibrate AC resistance and high-value capacitance standards. Here we describe the final construction stages and preliminary measurements of the four-terminal coaxial bridge. We a...
متن کاملA Capacitance Measurement System Using an IVD Bridge
A new system to characterize the magnitude and phase characteristics of 1 pF to 1 F capacitance standards over the 50 Hz to 100 kHz frequency range is described. The system has been developed to provide measurement support for LCR meters and general impedance measurement services. It consists of an inductive voltage divider (IVD) bridge capable of accurately comparing two capacitance standards...
متن کاملIntegrated in a 13mm Pressure-Sensing System
Small form-factor piezoresistive MEMS sensors, often configured in a Wheatstone bridge, are widely used to measure physical signals such as pressure [1-3], temperature [4], force [1], and gas concentration. A common method to realize a digital output from the bridge involves biasing the bridge with a DC voltage source and using a low-noise amplifier followed by an ADC. While a bridge measuremen...
متن کاملExtraction of Mos Capacitance in Fowler-nordheim Regime Using the Floating Gate Technique
The floating gate technique (FGT) is a very sensitive method to measure very low level leakage currents in MOS capacitors. This indirect technique requires the precise knowledge of the capacitance of the structure under test. We have studied the impact of the capacitance model (classic or quantum) and of polysilicon gate depletion effect. We have shown that for 7.2 nm thin EEPROM tunnel oxides,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Review of scientific instruments
دوره 82 5 شماره
صفحات -
تاریخ انتشار 2011