Study on the Constitutive Model for Jointed Rock Mass
نویسندگان
چکیده
A new elasto-plastic constitutive model for jointed rock mass, which can consider the persistence ratio in different visual angle and anisotropic increase of plastic strain, is proposed. The proposed the yield strength criterion, which is anisotropic, is not only related to friction angle and cohesion of jointed rock masses at the visual angle but also related to the intersection angle between the visual angle and the directions of the principal stresses. Some numerical examples are given to analyze and verify the proposed constitutive model. The results show the proposed constitutive model has high precision to calculate displacement, stress and plastic strain and can be applied in engineering analysis.
منابع مشابه
Jointed Rock Mass Effects on the Seismic Waves Scattering from the Canyon Sites in the Dam's Support
Seismic study of canyon sites has always been one of the important fields of seismic studies because of massive structures such as dams that are built in such sites. Jointed rock mass in rock canyon sites is one of the main site effects that can change the seismic waves. In this research, we studied the influence of this factor on the scattering of seismic waves. To fulfil this goal, we employe...
متن کاملConstitutive Modeling of Rocks, Rock Joints and Rock Masses including Strain Softening Behaviour
The rocks are formed through very complex processes and the complex behaviour of rock masses is dominated by the planes of weaknesses . Rock mass consists of intact rock and discontinuities. Many rocks show strain softening behaviour under loads. In this paper, the constitutive models for intact rocks and rock joints are presented. These form the basis for the development of constitutive models...
متن کاملNumerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran
This study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using Universal Distinct Element Code (UDEC). The numerical model is validated using practical data and analytical method for grouting process. Input data for the modeling, including geomechanical parameters along with grout properties, were obtained from a case study. The...
متن کاملEffects of statistical distribution of joint trace length on the stability of tunnel excavated in jointed rock mass
The rock masses in a construction site of underground cavern are generally not continuous, due to the presence of discontinuities, such as bedding, joints, faults, and fractures. The performance of an underground cavern is principally ruled by the mechanical behaviors of the discontinuities in the vicinity of the cavern. During underground excavation, many surrounding rock failures have close r...
متن کاملDeveloping a 3D stochastic discrete fracture network model for hydraulic analyses
Fluid flow in jointed rock mass with impermeable matrix is often controlled by joint properties, including aperture, orientation, spacing, persistence and etc. On the other hand, since the rock mass is made of heterogeneous and anisotropic natural materials, geometric properties of joints may have dispersed values. One of the most powerful methods for simulation of stochastic nature of geometri...
متن کامل