Impacts of Cooling Technology on Solder Fatigue for Power Modules in Electric Traction Drive Vehicles: Preprint
نویسندگان
چکیده
This paper presents three power module cooling topologies that are being considered for use in electric traction drive vehicles such as a hybrid electric, plug-in hybrid electric, or electric vehicle. The impact on the fatigue life of solder joints for each cooling option is investigated along with the thermal performance. Considering solder joint reliability and thermal performance, topologies using indirect jet impingement look attractive. Keywords-power electronics; reliability; jet impingement; solder joint fatigue
منابع مشابه
Yaw Rate Control and Actuator Fault Detection and Isolation for a Four Wheel Independent Drive Electric Vehicle
In this paper, a new actuator fault detection and isolation method for a four wheel independent drive electric vehicle is proposed. Also, a controller based on sliding mode control method is proposed for lateral stability of the vehicle. The proposed control method is designed in three high, medium and low levels. At the high-level, the vehicle desired dynamics such as longitudinal speed refere...
متن کاملSOI-Based Integrated Circuits for High-Temperature Applications
Potential shortage of world wide petroleum supply in the near future has created an enormous demand for green vehicles that use higher power electric motor drive in their traction systems. Application of power electronic modules in automobiles has generated the need for reliable and low-cost high-temperature electronics which can operate at the extreme temperatures that exist under the hood. In...
متن کاملInner Permanent Magnet Synchronous Machine Optimization for HEV Traction Drive Application in Order to Achieve Maximum Torque per Ampere
Recently, Inner permanent magnet (IPM) synchronous machines have been introduced as a possible traction motor in hybrid electric vehicle (HEV) and traction applications due to their unique merits. In order to achieve maximum torque per ampere (MTPA), optimization of the motor geometry parameters is necessary. This paper Presents a design method to achieve minimum volume, MTPA and minimum ...
متن کاملApplication of Speed Estimation Techniques for Induction Motor Drives in Electric Traction Industries and vehicles
Induction motors are the most commonly used in the traction industries and electric vehicles, due to their low primary cost, low maintenance costs, and good performance. Speed identification is needed for the induction motor drives. However, using of speed sensors in the induction motor drives is associated with problems such as, extra cost, reduced reliability, added mounting space, etc.. Ther...
متن کاملPower Quality Analysis in Electric Traction System with Three-phase Induction Motors
Three-phase induction motors are widely used in electric traction systems. Impacts of the traction vehicle equipped by three-phase induction motors on power quality are much different from the impacts of vehicles with DC traction motors. In this paper, the effects of the traction vehicle operation with threephase induction motors on power quality in 110 kV transmission network are investigated....
متن کامل