A note on the undercut procedure

نویسنده

  • Haris Aziz
چکیده

The undercut procedure was presented by Brams et al. [3] as a procedure for identifying an envy-free allocation when agents have preferences over sets of objects. They assumed that agents have strict preferences over objects and their preferences are extended over to sets of objects via the responsive set extension. We point out some shortcomings of the undercut procedure. We then simplify the undercut procedure of Brams et al. [3] and show that it works under a more general condition where agents may express indifference between objects and they may not necessarily have responsive preferences over sets of objects. Finally, we show that the procedure works even if agents have unequal claims.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Note on the Undercut Procedure ( Extended Abstract ) Haris Aziz

The undercut procedure was presented by Brams, Kilgour and Klamler (2012) as a procedure for identifying an envyfree allocation when agents have preferences over sets of objects. They assumed that agents have strict preferences over objects and their preferences are extended over to sets of objects via the responsive set extension. We point out some shortcomings of the undercut procedure. We th...

متن کامل

A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes

One of the important parameters in undercut slopes design is the determination of the maximum stable undercut span. The maximum stable undercut span is a function of slope geometry, the strength parameters of the slope material, condition of discontinuities, underground water condition, etc. However, the desired production capacity and therefore the size of excavating equipment will sometimes a...

متن کامل

Influence of modeling material on undercut slope failure mechanism

A series of physical modeling tests were conducted by means of a beam type geotechnical centrifuge machine in order to investigate the drainage impact on the slope failure mechanism under centrifugal acceleration. Meanwhile, the phenomenon of stress redistribution in undercut slopes and the formation of arching effect were studied. For this purpose, a poorly graded sandy soil (Silica sand No. 6...

متن کامل

Stress Intensity Factor Expression for Welded Butt Joint with Undercut and Inclined Lack of Penetration Defects considering the Effect of Joint Shape

In this paper, the stress intensity factor (SIF) expression for defected butt welds containing undercut and inclined lack of penetration (LOP) subject to far-field tensile stress is derived. Some of the standards such as ISO 5817 and BS EN 25817 have specified allowable limits for the length of the undercut and LOP defects and for the height of the weld. In addition, EN 29692 standard has deter...

متن کامل

A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE)

The significant costs insert on mineral processes due to mill liner wear including the labor costs, price of material and shut down periods. Therefore, the study of this phenomenon is economically important to optimize the mill operating conditions and liner profile design to decrease the wear rate. There is no appropriate and applicable research on impact wear evaluation of mill liners. In the...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014