Piezochromic Phenomena of Nanometer Voids Formed by Mono-Dispersed Nanometer Powders Compacting Process
نویسندگان
چکیده
Piezochromism describes a tendency of certain materials changing colors when they are subjected to various pressure levels. It occurs particularly in some polymers or inorganic materials, such as in palladium complexes. However, piezochromism is generally believed to work at high pressure range of 0.1-10 GPa. This research work focused on unique piezochromism responses of the nanometer voids formed by the 5-20 nm inorganic ISOH nanometer powders. It was discovered that microstructures of the nanometer voids could change color at very low pressures of only 0.002-0.01 GPa; its sensitivity to pressure was increased by tens of times. It is believed that the uniform microstructures of nanometer powders contributed to the material's high sensitivity of piezochromic phenomena. One factor which quantum optical change caused by nanometer voids affected the quantum confinement effect; another is surface Plasmon Resonance of great difference dielectric property between conductive ITO powder and insulation hydroxide.
منابع مشابه
Photo-Catalytic Nanometer Composite-Crystal TiO2 Powder Synthesized by Two-Step Method
TiCl4, ammonia, inorganic salts as raw material, nanometer composite-crystal TiO2 powders were synthesized by two-step chemical method. Precursors were crystallized with different phase and stable composite-crystal TiO2 with anatase and rutile phase was prepared at low temperature. Quantitative control of crystal phase was realized. Remarkable factors includ...
متن کاملNovel nanometer-level uniform amorphous carbon coating for boron powders by direct pyrolysis of coronene without solvent.
A 3 nm coronene coating and a 4 nm amorphous carbon coating with a uniform shell-core encapsulation structure for nanosized boron (B) powders are formed by a simple process in which coronene is directly mixed with boron particles without a solvent and heated at 520 °C for 1 h or at 630 °C for 3 h in a vacuum-sealed silica tube. Coronene has a melting point lower than its decomposition temperatu...
متن کاملCharacteristics of Fe-Cr-Al Alloy Nanopowders Prepared by Electrical Wire Explosion Process under Liquid Media
Fe-Cr-Al alloy nanopowders were successfully prepared by electrical wire explosion method in ethyl alcohol media. The formation of FeCr-Al alloy nanopowder was monitored by X-ray diffraction. The alloy powders have spherical shape and nanometer size. The alloy powders prepared by the electrical wire explosion method have main crystal structures of bcc Fe-Cr alloy. The geometric mean diameter an...
متن کاملMechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder
Boron carbide is one of the hardest materials. The combustion method was used to synthesize B4C-TiB2 nanocomposite powder in a B2O3-Mg-TiO2-C system. An experimental study of the formation of B4C–TiB2 nanoparticles was conducted in the thermal explosion mode. A mixture of B2O3:TiO2:Mg:C at a molecular ratio of 3:1:12:1 was chosen to obtain the B4C–TiB2. This powder mixture was milled for differ...
متن کاملNanometer-Scale Patterning on PMMA Resist by Force Microscopy Lithography
Nanoscale science and technology has today mainly focused on the fabrication of nano devices. In this paper, we study the use of lithography process to build the desired nanostructures directly. Nanolithography on polymethylmethacrylate (PMMA) surface is carried out by using Atomic Force Microscope (AFM) equipped with silicon tip, in contact mode. The analysis of the results shows that the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 8 شماره
صفحات -
تاریخ انتشار 2013