An Innovative Design of a Microtab Deployment Mechanism for Active Aerodynamic Load Control
نویسندگان
چکیده
This study presents an innovative design of a microtab system for aerodynamic load control on horizontal-axis wind-turbine rotors. Microtabs are small devices located near the trailing edge of the rotor blades and enable a rapid increase or decrease of the lift force through deployment of the tabs on the pressure or suction side of the airfoil, respectively. The new system has been designed to replace an earlier linearly-actuated microtab mechanism whose performance was limited by space restrictions and stiction. The newly-designed microtab system is based on a four-bar linkage that overcomes the two drawbacks. Its improved kinematics allows for the tab height to increase from 1.0% to 1.7% of the airfoil chord when fully deployed, thereby making it more effective in terms of aerodynamic load control. Furthermore, the modified four-bar link mechanism provides a more robust and reliable mechanical structure.
منابع مشابه
Robust Controller Design Based-on Aerodynamic Load Simulator Identification Driven by PMSM for Hardware-in-the-Loop Simulations
Aerodynamic load simulators generate the required time varying load to test the actuator’s performance in the laboratory. Electric Load Simulator (ELS) as one of variety of the dynamic load simulators should follows the rotation of the Under Test Actuator (UTA) and applies the desired torque to UTA’s rotor at the same time. In such a situation, a very large torque is imposed to the ELS from the...
متن کاملActive Power Filter Design by a Novel Approach of Multi-Objective Optimization
This paper presents an innovative active power filter design method to simultaneously compensate the current harmonics and reactive power of a nonlinear load. The power filter integrates a passive power filter which is a RL low-pass filter placed in series with the load, and an active power filter which comprises an RL in series with an IGBT based voltage source converter. The filter is assumed...
متن کاملControl System Design for a Morphing Wing Trailing Edge
Shape control of adaptive wings has the potential to enhance wing aerodynamic performance during cruise and high-speed off-design conditions. A possible way to attain this objective is to develop specific technologies for trailing edge morphing, aimed at variating the airfoil camber. In the framework of SARISTU project (EU-FP7), an innovative structural system incorporating a gapless deformable...
متن کاملارائه یک مکانیزم مناسب جهت کاهش فراجهش سازه تحت بار انفجار
as in order to protection of a blast loaded structure, three ways can be utilized: (1) increasing the stand-off using natural or artificial barriers, (2) increasing the structure strength or performance level, (3) decreasing the energy of blast using the passive, semi active, active and hybrid control methods. In recent method, using controlling mechanism and tools, the effect of blast waves is...
متن کاملDesign and Control of a Novel hybrid Active Power Filter based on Load Harmonic Currents Separation with the aim of DC-link voltage minimization in voltage source converter
This paper proposes a new hybrid active power filter, including voltage source converter (VSC) based active power filter and Thyristor Controllable LC Passive Filter (TCLC-HAPF) for eliminating harmonic load current components and compensating reactive power. This new structure which is based on the separation of high and low-frequency components of load current idea can reduce the drawbacks of...
متن کامل