Use of calcined Mg-Al-hydrotalcite to enhance the stability of celecoxib in the amorphous form.
نویسندگان
چکیده
The use of compound in amorphous forms is a promising approach to improve solubility of poorly water-soluble drugs. However, during storage, amorphous state can spontaneously transform to the lower energy crystalline form and this is a limiting factor for a large commercial use of drugs. In this paper, calcined hydrotalcite was employed to support amorphous celecoxib and several preparations at different weight drug/carrier ratio were prepared. Solubility of celecoxib from the prepared systems was evaluated and its physical stability during storage at different conditions was examined as well. The results show that HTlc-calc can be used as a support of amorphous celecoxib with consequent improvement of drug solubility and physical stability.
منابع مشابه
An Investigation into the Effect of Hydrotalcite Calcination Temperature on the Catalytic Performance of Mesoporous Ni-MgO-Al2O3 Catalyst in the Combined Steam and Dry Reforming of Methane
Several mesoporous nickel-based catalysts with MgO-Al2O3 as the catalyst support were prepared using a co-precipitation method at a constant pH. The supports were prepared from the decomposition of an Mg-Al hydrotalcite-like structure which had already been prepared with Mg/Al=1. Prior to impregnating 10 wt.% nickel on the supports, the precursor was decomposed at several ...
متن کاملCatalytic characterization of bi-functional catalysts derived from Pd–Mg–Al layered double hydroxides
Hydrotalcite like precursors containing Pd–Mg–Al with varying molar ratios, (Pd + Mg)/Al ≈ 3 and Mg/Pd ≈ 750 to 35, were prepared by coprecipitation of metal nitrates at constant pH. Characterization of samples as synthesized and their calcined products by elemental analyses, powder XRD, TG–DTA, FT–IR spectroscopy, TPR and N2 physisorption indicated a well crystalline hydrotalcite like structur...
متن کاملPreparation and Characterization of Celecoxib Dispersions in Soluplus®: Comparison of Spray Drying and Conventional Methods
The present study deals with characterization of dispersions of a poorly water-soluble drug, celecoxib (CLX) in polyvinyl caprolactame–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus® (SOL)) prepared by different techniques. Dispersions of CLX in SOL at different ratios (2:1, 1:1, 1:2, 1:4 and 1:6) were prepared by spray drying, conventional solvent evaporation and melting metho...
متن کاملPreparation and Characterization of Celecoxib Dispersions in Soluplus®: Comparison of Spray Drying and Conventional Methods
The present study deals with characterization of dispersions of a poorly water-soluble drug, celecoxib (CLX) in polyvinyl caprolactame–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus® (SOL)) prepared by different techniques. Dispersions of CLX in SOL at different ratios (2:1, 1:1, 1:2, 1:4 and 1:6) were prepared by spray drying, conventional solvent evaporation and melting metho...
متن کاملPhysico-chemical Properties of Synthetic Hydrotalcites in Relation to Composition
Ahstraet--Hydrotalcite solid solutions were prepared by coprecipitation followed by hydrothermal treatment between 150 ~ and 250~C. Based on the structural formula [Mgl_xAlx(OH)~lX+l(COz)x/2 9 mH20] x-, pure solid solutions were formed in the range Al/(Al + Mg) = 0.2 to 0.33, where m = (1 3x/2). Maximum crystallite size was achieved by hydrothermal treatment between 180 ~ and 200~ with x = 0.33...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V
دوره 66 2 شماره
صفحات -
تاریخ انتشار 2007