The influence of framework design on the load-bearing capacity of laboratory-made inlay-retained fibre-reinforced composite fixed dental prostheses.

نویسندگان

  • Filip Keulemans
  • Lippo V J Lassila
  • Sufyan Garoushi
  • Pekka K Vallittu
  • Cornelis J Kleverlaan
  • Albert J Feilzer
چکیده

Delamination of the veneering composite is frequently encountered with fibre-reinforced composite (FRC) fixed dental prosthesis (FDPs). The aim of this study is to evaluate the influence of framework design on the load-bearing capacity of laboratory-made three-unit inlay-retained FRC-FDPs. Inlay-retained FRC-FDPs replacing a lower first molar were constructed. Seven framework designs were evaluated: PFC, made of particulate filler composite (PFC) without fibre-reinforcement; FRC1, one bundle of unidirectional FRC; FRC2, two bundles of unidirectional FRC; FRC3, two bundles of unidirectional FRC covered by two pieces of short unidirectional FRC placed perpendicular to the main framework; SFRC1, two bundles of unidirectional FRC covered by new experimental short random-orientated FRC (S-FRC) and veneered with 1.5 mm of PFC; SFRC2, completely made of S-FRC; SFRC3, two bundles of unidirectional FRC covered by S-FRC. Load-bearing capacity was determined for two loading conditions (n = 6): central fossa loading and buccal cusp loading. FRC-FDPs with a modified framework design made of unidirectional FRC and S-FRC exhibited a significant higher load-bearing capacity (p<0.05) (927+/-74 N) than FRC-FDPs with a conventional framework design (609+/-119 N) and PFC-FDPs (702+/-86 N). Central fossa loading allowed significant higher load-bearing capacities than buccal cusp loading. This study revealed that all S-FRC frameworks exhibited comparable or higher load-bearing capacity in comparison to an already established improved framework design. So S-FRC seems to be a viable material for improving the framework of FRC-FDPs. Highest load-bearing capacity was observed with FRC frameworks made of a combination of unidirectional FRC and S-FRC.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Load-bearing capacity of indirect inlay-retained fixed dental prostheses made of particulate filler composite alone or reinforced with E-glass fibers impregnated with various monomers.

The load-bearing capacity and failure types of indirect inlay-retained fixed dental prostheses (FDP), made of particulate filler composite (PFC) (Estenia) alone or reinforced with E-glass fibers impregnated with various monomers were evaluated. Indirect inlay-retained FDPs were made between first premolars and first molars (N=30, 10/per group). The inlay parts of the specimens were silica coate...

متن کامل

A Modified Design for Posterior Inlay-Retained Fixed Dental Prosthesis

The aim of this paper is to report a clinical case with bilateral missing mandibular second premolars that were restored by metal-ceramic inlay-retained fixed dental prostheses. The first prosthesis was of a traditional design and the second was of a modified design. The suggested design is created by modifying the retainer wings of the traditional resin-bonded inlay-retained fixed dental prost...

متن کامل

The survival rate of fiber-reinforced composite inlay bridges after two million load cycles: An in vitro study

The survival rate of fiber-reinforced composite inlay bridges after two million load cycles: An in vitro study Dr. F. Darabi* - Dr. A. Mirfazaelian** - Dr. H. Naseri*** *Assistant Professor of Operative Dentistry Dept. - Faculty of Dentistry – Guilan University of Medical Sciences. **Assistant Professor of Removable Prosthodontics Dept. Faculty of Dentistry – Tehran University of Medical Scienc...

متن کامل

Fracture resistance of direct inlay-retained adhesive bridges: effect of pontic material and occlusal morphology.

This study evaluated the effect of a) pontic materials and b) occlusal morphologies on the fracture resistance of fi ber-reinforced composite (FRC) inlay-retained fixed dental prostheses (FDP). Inlay-retained FRC FPDs (N=45, n=9) were constructed using a) resin composite (deep anatomy), b) natural tooth, c) acrylic denture tooth, d) porcelain denture tooth and e) resin composite (shallow anatom...

متن کامل

بررسی مقاومت به شکست اینله بریج‌های Fiber-Reinforced Composite قدامی بالا و خلفی پایین در شرایط in vitro

Background and Aim: Considering flexural strength of fiber-reinforced composites (FRC) and also the role of conservative cavities in protecting sound tissue of abutments, the aim of this study was to evaluate the fracture resistance of these bridges by handmade samples in vitro.Materials and Methods: In this experimental in vitro study, 44 sound newly extracted teeth were used to make 22 fixed ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of biomechanics

دوره 42 7  شماره 

صفحات  -

تاریخ انتشار 2009