On Testing the Path Delay Faults of a Microprocessor Using its Instruction Set
نویسندگان
چکیده
This paper addresses the problem of testing path delay faults in a microprocessor using instructions. It is observed that a structurally testable path (i.e., a path testable through at-speed scan) in a microprocessor might not be testable by its instructions simply because no instruction sequence can produce the desired test sequence which can sensitize the paths and capture the fault effect into the destination output/flip-flop at-speed. These paths are called functionally untestable paths. We discuss the impact of delay defects on the functionally untestable paths on the overall circuit performance and illustrate that they do not need to be tested if the delay defect does not cause the path delay to exceed twice the clock period. Identification of such paths helps determine the achievable path delay fault coverage and reduce the subsequent test generation effort. The experimental results for two microprocessors (Parwan [1] and DLX [2]) indicate that a significant percentage of structurally testable paths are functionally untestable and thus need not be tested.
منابع مشابه
Test program synthesis for path delay faults in microprocessor cores
This paper addresses the problem of testing path delay faults in a microprocessor core using its instruction set. We propose to self-test a processor core by running an automatically synthesized test program which can achieve a high path delay fault coverage. This paper discusses the method and the prototype software framework for synthesizing such a test program. Based on the processor's instr...
متن کاملA New Approach to Design Fault Coverage Circuit with Efficient Hardware Utilization for Testing Applications
Considering full-scan circuits, incompletelyspecified tests, or test cubes, are used for test data compression. When considering path delay faults, certain specified input values in a test cube are needed only for determining the lengths of the paths associated with detected faults. Path delay faults, and therefore, small delay defects, would still be detected if such values are unspecified. Th...
متن کاملModel for Delay Faults Based upon Paths
Delay testing of combinational logic in a clocked environment is analyzed. A model based upon paths is introduced for delay faults. Any path with a total delay exceeding the clock interval is called a "path fault." This is a global delay fault model because it is associated with an entire path. The more familiar slow-to-rise or slow-to-fall gate delay fault, on the other hand, is a local fault ...
متن کاملFixed Hardware Implementation using Built-In Generation of Functional Broadside Tests
Considering full-scan circuits, incompletely-specified tests, or test cubes, are used for test data compression. When considering path delay faults, certain specified input values in a test cube are needed only for determining the lengths of the paths associated with detected faults. Path delay faults, and therefore, small delay defects, would still be detected if such values are unspecified. T...
متن کاملCritical Paths Selection for Delay Faults
Extended Abstract Right timing of complex digital circuits and systems in nanotechnology need careful design steps and testing. Incorrect timing can be caused during design or manufacturing processes. Incorrect timing is manifested as delay faults. The delay faults in digital circuit testing are more and more important due to huge number of gates and lines integrated on a chip specifically in n...
متن کامل