Improved Parallel Boost Power Converter for Power Factor Correction

نویسنده

  • T. Ajith Bosco
چکیده

The main objective of the study is to analysis and design parallel boost power converter for power factor correction using an active filtering approach by implementing single-phase soft-switching technique with an active snubber circuit. Zero voltage transition to turn ON and zero current transition to turn OFF is implemented by the active snubber circuit for the main switches with no any further current or voltage strains. By zero-current switching without the need of added voltage stress, auxiliary switch is turned ON and OFF. The proposed converter has simple structure, low cost and ease of control. The efficiency, which is about 96% in hard switching, will increases to about 98% in the proposed soft-switching parallel boost converter.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modified Bi-directional AC/DC Power Converter with Power Factor Correction

Most existing power  converters and industrial motor drive systems draw non-sinusoidal currents from the supply. Non-sinusoidal currents contained harm harmonics disturb the power supply which it causes serious concern for reliability. Other equipments that use the same power supply are adversely affected. This paper suggests the operation and performance of a new modified AC/DC converter that ...

متن کامل

Simulation of a Boost PFC Converter with Electro Magnetic Interference Filter

This paper deals with the simulation of a Boost Power Factor Correction (PFC) Converter with Electro Magnetic Interference (EMI) Filter. The diode rectifier with output capacitor gives poor power factor. The Boost Converter of PFC Circuit is analyzed and then simulated with diode rectifier. The Boost PFC Converter with EMI Filter is simulated for resistive load. The power factor is improved usi...

متن کامل

A Power Factor Correction Using Single-Inductor Dual-Output,... R.Kumaresan,et al,.

A Power Factor Correction Using singleinductor dual-output buck-boost converter operating in critical conduction mode is proposed in this paper. Each output of the SingleInductor Dual-Output buck-boost converter can be regulated independently by multiplexing a single inductor, Compared with a conventional two-stage multiple-output converter, the singleinductor dual-output buck-boost converter b...

متن کامل

Boost Converter for Power Factor Correction of DC Motor Drive

With the increasing demand for power from the ac line and more stringent limits for power quality, power factor correction has gained great attention in recent years. A variety of circuit topologies and control methods have been developed for the PFC application. While the discontinuous conduction mode (DCM) converters such as boost and flyback converters are well suited for low power applicati...

متن کامل

Single-Inductor Dual-Output Buck-Boost Power Factor Correction Converter

In this paper a single-inductor dual-output (SIDO) buck-boost PFC converter operating in critical conduction mode (CRM) is proposed. By multiplexing a single inductor, each output of SIDO buck-boost converter can be regulated independently. Compared with conventional two-stage multiple output converter, SIDO buck-boost PFC converter benefits from significant overall cost saving, small size and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014