Two Stabilising Control Strategies for the Brushless Doubly-fed Machine (bdfm)

نویسنده

  • P C Roberts
چکیده

The BDFM shows economic promise as a variable speed drive. One practical obstacle to commercial exploitation is the presence of operating speeds at which BDFM synchronous action cannot be maintained under open loop conditions. Two control strategies are proposed: feedback linearisation and control winding phase angle control which will enable BDFM synchronous action to be attained over the necessary operating speeds. This paper explains the theory of the two strategies, then suggests controllers for a specific BDFM. Finally the proposed control systems are tested by simulation and experiment. Both controllers successfully stabilised the BDFM. Whilst the feedback linearisation strategy gave superior performance in simulation, the difficulties of implementing it could limit its practical application.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Real-time Rotor Bar Current Measurements Using Bluetooth Technology for a Brushless Doubly-fed Machine (bdfm)

The Brushless Doubly Fed Machine (BDFM) shows economic promise as a variable speed drive or generator. The optimization of the machine and model-based control strategies both rely on machine models, and the experimental verification of these models. To date, dynamic measurements of rotor quantities have not been possible. The authors present a system of measuring rotor bar currents in real time...

متن کامل

Performance of Rotors in a Brushless Doubly-Fed Induction Machine (BDFM)

The paper presents experimental results to assess the performance of a variety of rotors used in a Brushless Doubly Fed Machine (BDFM). In the experiments the torque-speed characteristics were measured on a BDFM fitted with four rotors with five different windings. The measurements were made of the machine excited with just one stator supply with the second stator supply first open circuit, and...

متن کامل

Equivalent circuit for the brushless doubly fed machine (BDFM) including parameter estimation and experimental verification

Experimental results from a frame size 180 brushless doubly fed (induction) machine (BDFM) fitted with four rotor designs are presented. The machine is intended for use as a variable speed generator, or drive. A per phase equivalent circuit for the machine has been developed and a method of obtaining parameters for the circuit is described. Expressions for the torque as a function of speed have...

متن کامل

Experimental Analysis of Noise and Vibration for Large Brushless Doubly Fed Machines

In this work, a large-scale Brushless Doubly Fed Machine (BDFM) built in frame size D400 is tested at different operating conditions in order to examine its noise and vibration levels. A series of measurements were conducted on the machine to establish the main modes of excitation of vibration and noise developed by the machine. The harmonic spectrums of the vibration amplitudes are presented a...

متن کامل

Brushless Doubly-Fed Induction Machine as a Variable Frequency Transformer

VFT (variable frequency transformer) has been recently used as an alternative to HVDC (high voltage direct current) to control power flow between asynchronous networks. VFT consumes less reactive power than a back-to-back HVDC system, provides faster initial transient recovery, and has better natural damping capability. VFT is simply a DFIM (doubly-fed induction machine) where the machine torqu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002