Fracture of electrodes in lithium-ion batteries caused by fast charging
نویسندگان
چکیده
During charging or discharging of a lithium-ion battery, lithium is extracted from one electrode and inserted into the other. This extraction-insertion reaction causes the electrodes to deform. An electrode is often composed of small active particles in a matrix. If the battery is charged at a rate faster than lithium can homogenize in an active particle by diffusion, the inhomogeneous distribution of lithium results in stresses that may cause the particle to fracture. The distributions of lithium and stress in a LiCoO2 particle are calculated. The energy release rates are then calculated for the particle containing preexisting cracks. These calculations predict the critical rate of charging and size of the particle, below which fracture is averted. © 2010 American Institute of Physics. doi:10.1063/1.3492617
منابع مشابه
Deformation and fracture of silicon electrodes in lithium-ion batteries
We have performed a number of experiments to examine the mechanical behavior of amorphous silicon electrodes of lithium-ion batteries. In particular, we have measured the fracture energy of lithiated silicon thin-fi lm electrodes as a function of lithium concentration. The fracture energy is found to be similar to that of pure silicon and essentially independent of the concentration of lithium....
متن کاملNumerical investigation of the parameters of a prismatic lithium ion battery under load for electrical vehicle
Electric vehicles and hybrid electric vehicles are a suitable alternative for vehicles with hydrocarbons fuels to reduce pollution and fossil resources. The batteries operate as the driving force for these vehicles. One of the most critical parameters of the battery is computing the state of charge (SOC). The best range for SOC of lithium-ion battery is between 20% and 90%, and charging and dis...
متن کاملAn Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes
Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manu...
متن کاملThe effects of pulse charging on cycling characteristics of commercial lithium-ion batteries
The effects of a pulse charging technique on charge–discharge behavior and cycling characteristics of commercial lithium-ion batteries were investigated by comparison with the conventional direct current (dc) charging. The impedance spectra and cycling voltammograms of Li-ion batteries cycled by both protocols have been measured. The individual electrodes in the batteries have also been examine...
متن کاملImproved Mechanical and Electrochemical Properties of Artificial Graphite Anode Using Water-Based Binders in Lithium-Ion Batteries
In recent years, many studies have focused on the active materials of anodes to improve the performance of LIBs, while limited attention has been given to polymer binders, which act as inactive ingredients. However, polymer binders have amazing influence on the electrochemical performance of anodes. Herein, to investigate the binding performance between MCMB artificial graphite and the copper c...
متن کامل