Dynamics of Hypoid Gear Transmission With Nonlinear Time-Varying Mesh Characteristics

نویسندگان

  • Yuping Cheng
  • Teik C. Lim
چکیده

The coupled translation-rotation vibratory response of hypoid geared rotor system due to loaded transmission error excitation is studied by employing a generalized 3-dimensional dynamic model. The formulation includes the effects of backlash nonlinearity as well as time-dependent mesh position and line-of-action vectors. Its mesh coupling is derived from a quasi-static, 3-dimensional, loaded tooth contact analysis model that accounts for the precise gear geometry and profile modifications. The numerical simulations show significant tooth separation and occurrence of multi-jump phenomenon in the predicted response spectra under certain lightly loaded operating conditions. Also, resonant modes contributing to the response spectra are identified, and cases with super-harmonics are illustrated. The computational results are then analyzed to quantify the extent of nonlinear and time-varying factors. @DOI: 10.1115/1.1564064#

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nonlinear Dynamics Analysis of a Gear-Shaft-Bearing System with Breathing Crack and Tooth Wear Faults

Considering backlash, time-varying mesh stiffness and radial clearance of bearing, nonlinear dynamic model of gear bearing flexible shaft system is established taking into account breathing crack in shaft and tooth wear. Nonlinear dynamic equations are solved by Runge-Kutta method. Effect of backlash, crack in shaft and tooth wear faults on the nonlinear dynamic behavior of gear-shaft-bearing s...

متن کامل

Nonlinear Dynamics for Gear Fault Level

Since there are backlash friction and time-varying stiffness, the characteristics of gear pair has strong nonlinearity. When a gear has faults such as pitting, spalling and tooth breakage, there are often some nonlinear characteristics as super-harmonics or sub-harmonics along with vibration signal. These characteristics will cause some difficulty for fault diagnostics, so it is necessary to st...

متن کامل

تاثیر اصطکاک خشک بر ارتعاشات غیرخطی سیستم انتقال قدرت تک مرحله ای ترک دار

: The gear systems are widely used in industry to transmit the power or change the direction of the torque. Due to the extensive usage of the gears, the detailed designing and the subsequent maintenance of these systems are more and more evident. System recognition can be achieved through modeling the system, investigating the system behavior, and comparing the results obtained through the mode...

متن کامل

Multi-body Dynamics and Modal Analysis of Compliant Gear Bodies

This paper extends the multi-body dynamics modelling strategy for rigid gears to include compliant gear bodies in multi-mesh transmissions. Only external, fixed center, helical or spur gears are considered. This formulation combines distributed gear mesh stiffness and gear blank compliance models in a multi-body dynamics framework resulting in a set of non-linear differential equations with tim...

متن کامل

Performance analysis of generated hypoid gear based on measured tooth flank form data

Article history: Received 18 February 2013 Received in revised form 19 September 2013 Accepted 22 September 2013 Available online 24 October 2013 A method for predicting and analyzing the tooth contact pattern, vibration, and strength of a generated hypoid gear is needed to achieve a low-noise design and adequate quality control. However, it is not easy to analyze the performance of a generated...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003