Shear-wave elastic impedance

impedance (AI) and a parameter related to shear-wave velocity from seismic data, our ability to discriminate between different lithologies and fluid phases will increase. Prestack inversion on individual CDP gathers and inverting directly for VP, VS, and density have been tested in several ways, but the estimated parameters are often poorly determined. A more robust approach is to apply poststack inversion on partial stacks. For inversion of the near-offset stack, AI can be calculated directly from well logs. However, for the far-offset stack, we need to derive an equivalent of the acoustic impedance that can be used to calibrate the nonzero-offset seismic reflectivity. Connolly (1998, 1999) derived such an equivalent—elastic impedance (EI)—and demonstrated how, by using elastic impedance logs (which requires shear-wave logs), he was able to perform well calibration and inversion of far-offset data. This article describes a new function—shear-wave elastic impedance (SEI)—for linking converted-wave stacks to wells using a linearization of the Zoeppritz equations. SEI is similar to EI but adapted to P-S converted seismic data. It can be computed from acoustic log data (Pand S-wave velocities and density) and used for well calibration, wavelet estimation, and inversion of P-S reflectivity data leading to improved interpretability of converted wave data. (Equation 4 in Appendix 1 is the key mathematical formula in this approach to SEI).