Influence of Impeller Suction Specific Speed on Vibration Performance
نویسندگان
چکیده
The most commonly used hard limitation for pump suction specific speed is 11,000 (US units). This hard limit grew out of the recommendations from a 1982 reliability study by J.L. Hallam (Hallam 1982). Concomitant testing of the vibration performance of an OH2 4x6-11 pump was made with impellers designed for different suction specific speeds (Lobanoff and Ross 1985). This study showed that all things being equal, a strong relationship existed between suction specific speed and the pump vibration at off BEP operation. Given the significant changes in impeller design methods and computational tools in the subsequent three decades, this paper seeks to investigate how these new methods/tools have affected the relationship between suction specific speed and the pump vibration. Proceedings of the Twenty-Ninth International Pump Users Symposium October 1-3, 2013, Houston, Texas
منابع مشابه
Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE)
Centrifugal compressors produce high pressure ratio and rotate at speeds. So, a tiny unbalance can produce severe vibration. In this paper, effects of impeller gap on rotor vibration in a high speed centrifugal compressor is investigated. For this purpose, a numerical and experimental analysis are carried out. The moving reference frame method in FLUENT software is used for modeling of geometri...
متن کاملInfluence of Vaned Diffuser on Dangerous Blade Vibration Due to Blade Flow Interactions in a Centrifugal Compressor
Influence of diffuser vane position on dangerous blade vibration due to blade flow interactions at part load operating condition was investigated in a centrifugal compressor. By means of some measurement and analysis techniques a mechanism of interaction between blade vibration and circumferential flow condition in the impeller with vaned diffuser was determined, which is a cause of dangerous b...
متن کاملImpeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves
Now a day centrifugal pumps are vital components of industries. Certainly, one of the most important specifications of centrifugal pumps are the performance curves. In the present work, performance curves of a centrifugal pumps are obtained by Computational fluid dynamics (CFD) and as an outcome, CFD results compare by practical curves. At the first step impeller and volute are designed with tw...
متن کاملDesign and Performance Analysis of Centrifugal Pump
This paper deals with the design and performance analysis of centrifugal pump. In this paper, centrifugal pump is analyzed by using a single-stage end suction centrifugal pump. Two main components of a centrifugal pump are the impeller and the casing. The impeller is a rotating component and the casing is a stationary component. In centrifugal pump, water enters axially through the impeller eye...
متن کاملImpact of Impeller Stagger Angles on Pressure Fluctuation for a Double-Suction Centrifugal Pump
Pressure fluctuation may cause high amplitude of vibration of double‐suction centrifugal pumps, but the impact of impeller stagger angles is still not well understood. In this paper, pressure fluctuation experiments are carried out for five impeller configurations with different stagger angles by using the same test rig system. Results show that the stagger angles exert negligible effects on th...
متن کامل