Single-winding Regulation Mode of Controllable Reactor of Transformer Type
نویسندگان
چکیده
Abstract It is an important part to select the regulation mode in the design and manufacture of a controllable reactor of transformer type (CRT). Based on the circuit equations expressed by the self and mutual inductance, the piecewise expressions of the instantaneous current in work winding in the singlewinding regulation mode are obtained, and then the formula for calculating the RMS of each harmonic current in work winding is derived by Fourier series decomposition. At last, the control characteristics of CRT and the curves of the RMS of harnonic currents with reference to the output power in three typical single-winding regulation modes are presented and their advantages and disadvantages are compared in the sample, which provides a reference for the design of CRT.
منابع مشابه
Simulation Analysis for Controllable Reactor of Transformer Type with Multifold Magnetic Materials Integration
This paper presents a construction of a controllable reactor of transformer type (CRT) with multifold magnetic materials, and the construction based on the magnetic-integration techniques is used to weaken the magnetic coupling effect among control windings and eliminate requirement of series current limiting reactance. At last, based on the proposed equivalent circuit of integrated magnetic st...
متن کاملApplication of Magnetic Integrated Technology in Controllable Reactor of Transformer Type
There is the magnetic coupling among control windings of controllable reactor of transformer type (CRT), the decoupling integrated magnetic technology is applied to the structure design of CRT in this paper. To realize the decoupling among the control windings we propose a magnetic integrated structure of CRT by providing low magnetic resistance magnetic circuit for control windings magnetic fl...
متن کاملInfluence of the Parameters of Disk Winding on the Impulse Voltage Distribution in Power Transformers
Overvoltage distribution along the transformer winding must be uniform to certify the safety of the operation of the power transformer. Influence of the parameters variation on the impulse voltage distribution (IVD) in disk winding transformer is going to be analyzed which hasn’t been analyzed on this type of winding in the previous papers. In this research, a transformer with disk winding and ...
متن کاملCharacterization of Power Transformer Electromagnetic Forces Affected by Winding Faults
Electromagnetic forces in power transformer windings are produced by interaction between the leakage fluxes and current passing them. Since the leakage flux distribution along the windings height is in two axial and radial directions, so the electromagnetic forces have two components, radial and axial. There is a risk that a large electromagnetic force due to the short circuit or inrush current...
متن کاملDetermination of Winding Losses of Low-Profile Planar-Type Transformer
At high frequency, the winding losses of power transformer due to skin and proximity effects becomes a significant component in the loss calculation of the transformer efficiency. This paper examines the winding losses associated with these effects for planar-type low-profile transformers that are suitable for high frequency high density soft switching power supply application. The transformer ...
متن کامل