Treatment of Aqueous Film-Forming Foam by Heat-Activated Persulfate Under Conditions Representative of In Situ Chemical Oxidation
نویسندگان
چکیده
Poly- and perfluoroalkyl substances (PFASs) have been detected in an increasing number of water supplies. In many instances, the contamination is associated with the use of PFAS-containing aqueous film-forming foams (AFFF) in firefighting activities. To investigate the potential for remediating AFFF contamination in groundwater with heat-activated persulfate, PFAS oxidation and the generation of transformation products was evaluated under well-controlled conditions. Fluorotelomer- and perfluoroalkyl sulfonamide-based polyfluorinated compounds were transformed to perfluorinated carboxylic acids, which underwent further degradation under acidic conditions produced after persulfate decomposed. The presence of aquifer sediments decreased the efficiency of the remedial process but did not alter the transformation pathways. At high concentrations, the presence of organic solvents, such as those present in AFFF formulations, inhibited transformation of a representative perfluorinated compound, perfluorooctanoic acid. Heat-activated persulfate did not transform perfluorooctanesulfonic acid or perfluorohexanesulfonic acid under any conditions. Despite challenges associated with the creation of acidic conditions in the subsurface, the potential for generation of undesirable transformation products, and the release of toxic metals, heat-activated persulfate may be a useful in situ treatment for sites contaminated with polyfluoroalkyl substances and perfluorocarboxylic acids.
منابع مشابه
Aqueous Quinoline Treatment with Iron/ Copper Activated UV/ Persulfate Process in a Falling Film Photo-Reactor
متن کامل
2-Chlorophenol Removal of Aqueous Solution Using Advanced Oxidation Processes Resulting from Iron/ Persulfate and Ultra Violet/ Persulfate
Background: Advanced oxidation processes are used to remove toxic aromatic compounds with low biodegradability, such as 2-chlorophenol. This study investigates the use of Sulfate (SO4-) and persulfate (S2O82-) radicals, as one of the advanced oxidation methods, to remove 2- chlorophenol from aquatic solutions. Materials and Methods: This experimental and pilot-scale study was carried out usi...
متن کاملArsenic Oxidation Using UV-Activated Persulfate in Aqueous Solutions: Optimization Using Response Surface Methodology Based on Box-Bencken Design
Introduction: The use of arsenic contaminated water can cause a variety of adverse health effects in humans. Therefore, it is essential to seek out a method to remove arsenic more efficiently. This study examined the amount of arsenic oxidation by response surface methodology (RSM) based on Box-Bencken design. Materials and Methods: In this study, oxidizing arsenite to arsenate was performed b...
متن کاملRemediation of total petroleum hydrocarbons using combined in-vessel composting and oxidation by activated persulfate
This study was investigated the efficiency of activated persulfate and in-vessel composting for removal of total petroleum hydrocarbons. Remediation by activated persulfate with ferrous sulfate as pre-treatment was done at batch system. In the chemical oxidation, various variables including persulfate concentrations (10-3000 mg/g as waste), ...
متن کاملSonocatalytic degradation of p-chlorophenol by nanoscale zero-valent copper activated persulfate under US irradiation in aqueous solutions
In this study, nanoscale zero-valent copper (nZVC) as catalyst activated persulfate (PS) was used for the degradation of p-chlorophenol (p-CP) under ultrasonic (US) irradiation in aqueous solution. The effect of different operational parameters such as solution pH (3.5-10.5), PS concentration (1-7.5 mm/L), nZVC dosage (5-35 mg/L) and initial p-CP concentration (10-100 mg/L) were evaluated at di...
متن کامل