Improved Utilization of Wood and Reduced Energy Use during Lumber Processing through Effective Drying

نویسنده

  • M. Milota
چکیده

Issue: Drying lumber in the Western U.S. consumes over 60 million GJ of fuel. Over half of this is natural gas and the balance is from wood. Large quantities are also dried in the southern U.S. Dramatically reducing energy use would require major changes in the drying process; however, small changes in the way a mill is operated can have a significant impact on the energy use. Environmental compliance is also energy intensive if regenerative thermal oxidizers are used.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

COMPARISON OF TWO KILN-DRYING SCHEDULES FOR TURKISH HAZEL (Corylus colurna) LUMBER OF 5-CM THICKNESS

Turkish hazel (Corylus colurna) lumber with a nominal thickness of 5 cm from the Kastamonu region, Turkey, was dried through conventional kiln drying using two different programs, a nonprotective drying schedule and a protective drying schedule. The goal of the study was to obtain a kiln schedule that would maintain wood quality and also save drying time until a final moisture content of 8 ± 2%...

متن کامل

Grade distribution and drying degrade of sweetgum and yellow-poplar structural lumber

The fact that the supply of southern pine timber is changing to include more lower quality plantation stock may provide incentive for utilizing lower density hardwoods for structural lumber. Yellow-poplar and sweetgum are potential substitutes for southern pine. A major problem in utilizing soft hardwoods for structural lumber is the difficulties associated with drying. A study of the grade dis...

متن کامل

Drying Energy Efficiency Through Partial Air-Drying: A Case Study

The green lumber products tend towards a state of equilibrium with the surrounding environment. The final target is the equilibrium moisture content (EMC). Whether is natural convection in the lumberyard or forced convection in the kiln drier, the road towards the final EMC consumes time and energy. The air drying operations (natural convection) are not an easy task for the drying management. T...

متن کامل

Detection of wetwood by ultrasonics

Wetwood, or bacterially infected wood, is a severe processing problem and causes serious drying defects in lumber. The detection of wetwood is, therefore, important for proper processing and quality wood products. An investigation has been carried out to detect wetwood of cherrybark oak (Quercus pagoda Raf.), water oak (Quercus nigra, L.), hickory (Carya spp.), and eastern cottonwood (Populus d...

متن کامل

Using Simulation to Assess the Performance of a Breakthrough Wood-drying Technology

Conventional wood drying technologies dry enormous batches of lumber bundles. However, they are really inefficient and lack the agility needed to satisfy customers’ expectations. Researchers recently developed a patented precision drying approach that uses a high frequency technology. By building a discrete event simulation model, it has been possible to predict the impacts, benefits and possib...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006