Complete Dentures Fabricated with CAD/CAM Technology and a Traditional Clinical Recording Method
نویسندگان
چکیده
The introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) technology into complete denture (CD) fabrication ushered in a new era in removable prosthodontics. Commercially available CAD/CAM denture systems are expected to improve upon the disadvantages associated with conventional fabrication. The purpose of this report is to present the workflow involved in fabricating a CD with a traditional clinical recording method and CAD/CAM technology and to summarize the advantages to the dental practitioner and the patient.
منابع مشابه
Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures
PURPOSE The goal of this study was to compare the adhesion of Candida albicans to the surfaces of CAD/CAM and conventionally fabricated complete denture bases. MATERIALS AND METHODS Twenty discs of acrylic resin poly (methyl methacrylate) were fabricated with CAD/CAM and conventional procedures (heat-polymerized acrylic resin). The specimens were divided into two groups: 10 discs were fabrica...
متن کاملProspective cohort pilot study of 2-visit CAD/CAM monolithic complete dentures and implant-retained overdentures: Clinical and patient-centered outcomes.
STATEMENT OF PROBLEM Presently, no studies have evaluated clinical outcomes or patient-centered outcomes for complete dentures fabricated with computer-aided design and computer aided manufacturing (CAD/CAM) technology. PURPOSE The purpose of this prospective cohort pilot study was to evaluate the clinical and patient-centered outcomes for CAD/CAM monolithic dentures fabricated in 2 visits. ...
متن کاملDesign and fabrication of complete dentures using CAD/CAM technology: Erratum
The aim of the study was to test the feasibility of using commercially available computer-aided design and computer-aided manufacturing (CAD/CAM) technology including 3Shape Dental System 2013 trial version, WIELAND V2.0.049 and WIELAND ZENOTEC T1 milling machine to design and fabricate complete dentures.The modeling process of full denture available in the trial version of 3Shape Dental System...
متن کاملHealth Technology Assessment of CAD/CAM in Dentistry
Introduction: Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) are the latest achievements of Prosthodontics and Restorative Dentistry. The aim of this research is to help make appropriate decision whether to use this technology in Iran. Methods: Studies were included in this review that compared Dental CAD/CAM with conventional restorativ...
متن کاملClinical and Cytological Evaluation of Removable Partial Denture Fabricated by Selective Laser Sintering Additive Prototyping Technique
INTRODUCTION: Recent researches have shown that, in principle, computer-assisted design, computer-assisted manufacture and rapid prototype technologies (CAD/CAM/RP) can be successfully applied to the fabrication of removable partial denture (RPD) alloy frameworks and replace laboratory crafting techniques. The CAD/CAM techniques have been widely used for a long time to manufacture dental prosth...
متن کامل