Conditions of Nucleation and Interface Propagation in Thermoplastic Materials
نویسندگان
چکیده
Nucleation and interface propagation criteria are derived with account for temperature variation in the course of phase transition (PT) and internal variables. A model problem concerning the nucleation of thin inclined infinite layer in a rigid-plastic half-space under prescribed normal and shear stresses is solved. Nontrivial effect of shear stress on the PT pressure is shown.
منابع مشابه
Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation
In the present research, damage mechanisms during room temperature uniaxial tensile testing of two different modern high strength dual phase steels,DP780 and DP980, were studied. Detailed microstructural characterization of the strained and sectioned samples was performed by scanning electron microscopy (SEM). The results revealed that interface decohesion, especially at the triple junctions of...
متن کاملShot Peening as an Alternative to Fatigue Life Improvement of CK45 Steel Coated with an Electroless Ni-Cu-P
The effect of an electroless Ni-Cu-P coating on the fatigue behavior of quenched and tempered CK45 steel has been investigated. The fatigue tests under rotating bending conditions have been conducted in three different conditions of uncoated, as-deposited and shot peened prior to the coating deposition. The results indicate that plating of the base steel leads to a fatigue life reduction. The d...
متن کاملDynamics of Love-Type Waves in Orthotropic Layer Under the Influence of Heterogeneity and Corrugation
The present problem deals with the propagation of Love-type surface waves in a bedded structure comprises of an inhomogeneous orthotropic layer and an elastic half-space. The upper boundary and the interface between two media are considered to be corrugated. An analytical method (separation of variables) is adapted to solve the second order PDEs, which governs the equations of motion. Equations...
متن کاملWave Propagation at an Interface of Elastic and Microstretch Thermoelastic Solids with Microtemperatures
In the present paper, the problem of reflection and transmission of waves at an interface of elastic and microstretch thermoelastic solids with microtemperatureshas been studied. The amplitude ratios of various reflected and transmitted waves are functions of angle of incidence and frequency of incident wave. The expressions of amplitude ratios have been computed numerically for a particular mo...
متن کاملTHERMAL FATIGUE RESISTANCES OF 356 AND 413 CAST Al ALLOYS
Abstract: Thermal fatigue is a stochastic process often showing considerable scatter even in controlled environments. Due to complexity of thermal fatigue, there is no a complete analytical solution for predicting the effect of this property on the life of various components, subjected to severe thermal fluctuations. Among these components, one can mention car cylinder, cylinder head and pi...
متن کامل