A 65 - NM CMOS RF Mixer for Different Applications
نویسندگان
چکیده
A down conversion RF mixer is designed with 65nm CMOS technology for a different low power consumption applications. Mixer structure comprises a double-balanced Gilbert-Cell with improving linearity method in the RF stage of circuit; all is at a supply voltage of 1.8V and a power of 2.17 mW. The circuit is simulated for different spectrum applications as: 200 MHz mobile users, 1.9 GHz wireless applications, and 20 to 60 GHz commercial satellite and pointtopoint communications. The reported design achieves good values in terms of a radio frequency mixer evaluating parameters such as: Consumed Power, Conversion Gain, Noise Figure and Linearity.
منابع مشابه
Designing of RF Single Balanced Mixer with a 65nm CMOS Technology Dedicated to Low Power Consumption Wireless Applications
The present work consists of designing a Single Balanced Mixer (SBM) with the 65 nm CMOS technology, this for a 1.9 GHz RF channel, dedicated to wireless applications. This paper shows; the polarization chosen for this structure, models of evaluating parameters of the mixer, then simulation of the circuit in 65nm CMOS technology and comparison with previously treated.
متن کاملHigh linearity, low power RF mixer design in 65ᅡᅠnm CMOS technology
A design of RF down-conversion Gilbert-Cell, with 65 nm CMOS technology, at a supply voltage of 1.8 V, with a new degenerating structure to improve linearity. This architecture opens the way to more integrated CMOS RF circuits and to achieve a good characteristics in terms of evaluating parameters of RF mixers with a very low power consumption (2.17 mW). At 1.9 GHz RF frequency; obtained result...
متن کاملThe BLIXER, a Wideband Balun-LNA-I/Q-Mixer Topology
This paper proposes to merge an I/Q current-commutating mixer with a noise-canceling balun-LNA. To realize a high bandwidth, the real part of the impedance of all RF nodes is kept low, and the voltage gain is not created at RF but in baseband where capacitive loading is no problem. Thus a high RF bandwidth is achieved without using inductors for bandwidth extension. By using an I/Q mixer with 2...
متن کاملDesign of a Very Low-power, Low-cost 60 GHz Receiver Front-End Implemented in 65 nm CMOS Technology
The research on the design of receiver front-ends for very high data-rate communication in the 60 GHz band in nanoscale CMOS technologies is going on for some time now. While a multitude of 60 GHz front-ends have been published in recent years, they are not consequently optimized for low power consumption. Thus, these front-ends dissipate too much power for battery-powered applications like han...
متن کاملA High Linear And Low Noise CMOS RF Front-End For 2.4GHz ZigBee Applications
A 2.4 GHz CMOS RF front-end using for ZigBee application is described. The front-end consists of a low noise amplifier and a down-mixer and uses a 2 MHz IF frequency. A common source with resistive feedback and an inductive degeneration are adopted for a low noise amplifier, and a 20 dB gain control step is digitally controlled. A passive mixer for low current consumption is employed. The RF fr...
متن کامل