A two-pressure model for slightly compressible single phase flow in bi-structured porous media
نویسندگان
چکیده
Problems involving flow in porous media are ubiquitous in many natural and engineered systems. Mathematical modeling of such systems often relies on homogenization of pore-scale equations and macroscale continuum descriptions. For single phase flow, Stokes equations at the pore-scale are generally approximated by Darcy's law at a larger scale. In this work, we develop an alternative model to Darcy's law that can be used to describe slightly compressible single phase flow within bi-structured porous media. We use the method of volume averaging to upscale mass and momentum balance equations with the fluid phase split into two fictitious domains. The resulting macroscale model combines two coupled equations for average pressures with regional Darcy's laws for velocities. Contrary to classical dual-media models, the averaging process is applied directly to Stokes problem and not to Darcy's laws. In these equations, effective parameters are expressed via integrals of mapping variables that solve boundary value problems over a representative unit cell. Finally, we illustrate the behavior of these equations for model porous media and validate our approach by comparing solutions of the homogenized equations with computations of the exact microscale problem.
منابع مشابه
Comparison of Thermal Dispersion Effects for Single and two Phase Analysis of Heat Transfer in Porous Media
The present work involves numerical simulation of a steady, incompressible forcedconvection fluid flow through a matrix of porous media between two parallel plates at constanttemperature. A Darcy model for the momentum equation was employed. The mathematical model forenergy transport was based on single phase equation model which assumes local thermal equilibriumbetween fluid and solid phases. ...
متن کاملAnalytical Investigation of Forced Convection in Thermally Developed Region of a Channel Partially Filled with an Asymmetric Porous Material- LTNE Model
In present work forced convection flow in a channel partly filled with a porous media under asymmetric heat flux boundary condition has been investigated. The porous material is distributed on the one wall. Darcy–Brinkman and LTNE model have been assumed in order to solve momentum and energy equations, respectively. Fully developed conditions are considered in order to solve velocity and the te...
متن کاملA Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media
In this study, we present a numerical solution for the two-phase incompressible flow in the porous media under isothermal condition using a hybrid of the linear lower-order nonconforming finite element and the interior penalty discontinuous Galerkin (DG) method. This hybridization is developed for the first time in the two-phase modeling and considered as the main novelty of this research.The p...
متن کاملA New Approach for Constructing Pore Network Model of Two Phase Flow in Porous Media
Development of pore network models for real porous media requires a detailed understanding of physical processes occurring on the microscopic scale and a complete description of porous media morphology. In this study, the microstructure of porous media has been represented by three dimensional networks of interconnected pores and throats which are designed by an object oriented approach. Af...
متن کاملSolutions to a Model for Compressible Immiscible Two Phase Flow in Porous Media
In this article, we study the existence of solutions to a nonlinear degenerate system modelling the displacement of two-phase compressible immiscible flow in a three dimensional porous media. The aim of this work is to treat the model with its general form with the whole nonlinear terms. Especially, we consider the case where the density of each phase depends on its corresponding pressure. We d...
متن کامل