Reverse Microemulsion Synthesis and Electrochemical Properties of LiNiO2 Powders
نویسندگان
چکیده
Lithium nickel oxide (LiNiO2) powders with an R3 m structure are successfully synthesized via a developed reverse microemulsion process. This method can effectively reduce the calcination temperature for synthesizing monophasic LiNiO2 powders to 700 C, which is much lower than that in the solid-state process. Nanosized LiNiO2 powders with narrow particle size distribution are obtained via the microemulsion process. Heating the precursors in pure oxygen results in the formation of LiNiO2 powders with an orderly arranged structure. The electrochemical analysis reveals that the microemulsion-derived LiNiO2 powders exhibit high discharge capacity and good cycleability.
منابع مشابه
Synthesis of Iron Yttrium Garnet Nanoparticles by Reverse Microemulsion Method
Colloidal nanodispersion of Iron Yttrium Garnet has been preparedbymixing the two ternary mixture of Triton X-100 (surfactant), n-heptane and aqueous solution that differing only in the aqueous phase.Ethanolwas added as cosurfactant and mixed them by ultrasound bath. By mixing these twomicroemulsions, Iron Yttrium garnet (Y3 Fe5 O12) nanodispersionwas obtained. Solids were settled by centrifuge...
متن کاملReverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles
The reverse co-precipitation method was used for synthesis of the pure phase multiferroic BiFeO3 (BFO) nanoparticles. Influence of different pH values on the microstructure and magnetic properties of the BFO nanopowders was investigated. Thermogravimetric-differential thermal analysis (TG-DTA) technique indicated that the optimal temperature for calcination is 550°C. The phase formation and the...
متن کاملThe effect of fuel type on the synthesis of LiMn1.5Ni0.5O4 powders by solution combustion route
In this research LiMn1.5Ni0.5O4 nano powders that are used as cathode material for lithium-ion batteries were prepared by solution combustion synthesis route. Cetyl trimethyl ammonium bromide (CTAB), mixture of “CTAB and glycine” and also mixture of “CTAB and citric acid” were used as fuel using fuel to oxidant ratio of 0.5. The effect of fuel type on microstructure and electrochemical properti...
متن کاملSynthesis, Characterization and Investigation of Photocatalytic Activity of transition metal-doped TiO2 Nanostructures
In this work, M-doped TiO2 nanostructures (M: Fe, Co and Ni) were synthesized by reverse microemulsion method. The as-prepared products were analyzed by different techniques such as scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). The effect of various dopants (Fe, Co and Ni) on ba...
متن کاملSynthesis of HA nanoparticles in the presence of anionic and cationic polyelectrolyte
Nanosized hydroxyapatite (HA) powders have been synthesized by an inverse microemulsion system using cyclohexane, an anionic surfactant and aqueous solutions of calcium nitrate tetrahydrate and biammonium hydrogen phosphate in the presence of anionic and caionic polyelectrolyte with the inducement of ultrasound irradiation. Prepared HA in presence of anionic polyelectrolyte has a different morp...
متن کامل