A new approach to construct multicast trees in MPLS networks
نویسندگان
چکیده
In this paper1, we present a new approach to construct multicast trees in MPLS networks. This approach utilizes MPLS LSPs between multicast tree branching node routers in order to reduce forwarding states and enhance scalability. In our approach only routers that are acting as multicast tree branching node for a group need to keep forwarding state for that group. All other non-branching node routers simply forward data packets over traffic engineered unicast routes using MPLS LSPs. We can deduce that our approach can be largely deployed because it uses for multicast traffic the same unicast MPLS forwarding scheme. In this paper, we briefly discuss MPLS, the multicast scalability problem, merging the two technologies, related works and different techniques for forwarding state reduction. We evaluate the approach and present some related issues to conclude finally that it is feasible and promising.
منابع مشابه
Multicast computer network routing using genetic algorithm and ant colony
Due to the growth and development of computer networks, the importance of the routing topic has been increased. The importance of the use of multicast networks is not negligible nowadays. Many of multimedia programs need to use a communication link to send a packet from a sender to several receivers. To support such programs, there is a need to make an optimal multicast tree to indicate the opt...
متن کاملSupporting PIM-SM in All-Optical Lambda-Switched Networks
We describe a protocol to construct optical multicast trees in lambdaswitched networks running PIM-SM. Based on the MPLS architecture, the protocol maps a multicast tree constructed by PIM-SM onto point-to-multipoint LSPs that are connected to form an equivalent WDM multicast tree. LSP set-up request is receiver-initiated in the protocol. A mechanism to collect information about the capability ...
متن کاملIP Multicast Support in MPLS
Multicast support in a Multipro-tocol Label Switching (MPLS) network has yet to be deened. An MPLS network consists of label switching devices such as ATM. This document discusses both dense-mode and sparse-mode IP multicast within the context of MPLS networks. Unlike unicast routing, dense-mode multicast routing trees are established in a data-driven manner and it is not possible to topologica...
متن کاملA New Method based on Intelligent Water Drops for Multicast Routing in Wireless Mesh Networks
In recent years a new type of wireless networks named wireless mesh networks has drawn the attention of researchers. In order to increase the capacity of mesh network, nodes are equipped with multiple radios tuned on multiple channels emerging multi radio multi channel wireless mesh networks. Therefore, the main challenge of these networks is how to properly assign the channels to the radios. O...
متن کاملMultipoint LDP (mLDP) In-Band Signaling with Wildcards
There are scenarios in which an IP multicast tree traverses an MPLS domain. In these scenarios, it can be desirable to convert the IP multicast tree "seamlessly" into an MPLS Multipoint Label Switched Path (MP-LSP) when it enters the MPLS domain, and then to convert it back to an IP multicast tree when it exits the MPLS domain. Previous documents specify procedures that allow certain kinds of I...
متن کامل