Using Image-based CFD to Investigate the Intracardiac Turbulence
نویسندگان
چکیده
A numerical framework designed to compute the blood flow in patientspecific human hearts is presented. The geometry of the heart cavities and associated wall motion are extracted from 4D medical images while the valves of the heart are accounted for thanks to low order geometrical models. The resulting blood flow equations are solved using a fourth-order low-dissipative finite-volume scheme and a mixed Aribtrary Lagrangian-Eulerian / Immersed Boundary framework. On top of retrieving the main fluid flow phenomena commonly observed in the left heart, the methodology allows studying the heart flow dynamics, including the turbulence characteristics and cycle-to-cycle variations.
منابع مشابه
Evaluation of CFD Accuracy for the Ventilation Study of a Naturally Ventilated Broiler House
Using the CFD model, a new ventilation system design will be found later taking into consideration the ventilation efficiency such as uniformity, stability, and suitability of environmental factors in a naturally ventilated broiler house. Because conducting a field experiment for the ventilation study presented so many difficulties, a reliable 3-dimentional computational fluid dynamics (CFD) mo...
متن کاملCFD Study and Energy Optimization of Industrial Double-Cyclone in HDPE Drying Process
In this paper, a double-cyclone is used as a gas-solid separator in the fluid bed-drying process to prepare dry HDPE powder from a wet feed of 56000 kg/hr. The quality of dry HDPE depends mainly on particles behavior and flow pattern in the dryer which affect the double-cyclones as an effective equipment in this process. Controlling of the inlet carrier gas causes excellent flow pattern, desire...
متن کاملIntake Manifold Flow Assessment on a 3-cylinder Natural Aspirated Downsized Engine Using CFD and GT-SUITE
In this paper the intake manifold as the most effective part on engine’s volumetrice efficiency is in vestigated in detail with emphesizing on flow behavior and characterestics. The eight different design have been prepared and imported to CFD software. Five objective functions for investigation of flow have been connsidered and applied in TOPSIS with different weights. Mass flow rate,massfl...
متن کاملExperimental Investigation and Cfd Simulation of Horizontal Stratified Two-phase Flow Phenomena
For the investigation of stratified two-phase flow, two horizontal channels with rectangular crosssection were built at Forschungszentrum Rossendorf. The channels allow the investigation of air/water co-current flows, especially the slug behaviour, at atmospheric pressure and room temperature. The test-sections are made of acrylic glass, so that optical techniques, like high-speed video observa...
متن کاملCfd Methodology and Validation for Single-phase Flow in Pwr Fuel Assemblies
This paper presents the CFD modeling methodology and validation for steady-state, normal operation in a PWR fuel assembly. This work is part of a program that is developing a CFD methodology for modeling and predicting single-phase and two-phase flow conditions downstream of structural grids that have mixing devices. The purpose of the mixing devices (mixing vanes in this case) is to increase t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017