Elastomeric membrane valves in a disc.
نویسندگان
چکیده
We present elastomeric membrane valves integrated into a centrifugal microfluidic platform for precise control of fluid on a disc. The amount of the fluid passing through the valves, which depends on the rotating speed of the disc and the membrane thickness, has been characterized, and could be precisely controlled by tuning the disc motion.
منابع مشابه
Experimentally validated quantitative linear model for the device physics of elastomeric microfluidic valves.
A systematic experimental study and theoretical modeling of the device physics of polydimethylsiloxane "pushdown" microfluidic valves are presented. The phase space is charted by 1587 dimension combinations and encompasses 45-295 μm lateral dimensions, 16-39 μm membrane thickness, and 1-28 psi closing pressure. Three linear models are developed and tested against the empirical data, and then co...
متن کاملMicrofluidic cell electroporation using a mechanical valve.
A microfluidic electroporation technique is demonstrated based on the operation of an elastomeric valve in a poly(dimethylsiloxane) (PDMS) fabricated microchip and a common dc power supply. The pulse needed for permeabilization of the cell membrane is generated by temporarily interrupting the circuit using the valve. The electropermeabilization of suspended and adherent Chinese hamster ovary ce...
متن کاملIntegrated Elastomer Fluidic Lab-on-a-chip – Surface Patterning and DNA Diagnostics
We recently developed a method of multilayer fabrication for elastomeric devices, which we used to fabricate monolithic active valves and pumps. Here we describe efforts to use these pumps and valves in an integrated DNA diagnostic chip and show results of a key component, surface patterning, with two different kind of surface chemistries by using similar elastomeric channel devices. Flow contr...
متن کاملMicrofluidic automation using elastomeric valves and droplets: reducing reliance on external controllers.
This paper gives an overview of elastomeric valve- and droplet-based microfluidic systems designed to minimize the need of external pressure to control fluid flow. This Concept article introduces the working principle of representative components in these devices along with relevant biochemical applications. This is followed by providing a perspective on the roles of different microfluidic valv...
متن کاملHigh-density fabrication of normally closed microfluidic valves by patterned deactivation of oxidized polydimethylsiloxane.
The use of polydimethylsiloxane (PDMS) in microfluidic devices is extensive in academic research. One of the most fundamental treatments is to expose PDMS to plasma oxidation in order to render its surface temporarily hydrophilic and capable of permanent bonding. Here, we show that changes in the surface chemistry induced by plasma oxidation can spatially be counteracted very cleanly and reliab...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Lab on a chip
دوره 11 8 شماره
صفحات -
تاریخ انتشار 2011