The Half - Pin and the Pin Tract :
نویسنده
چکیده
A lthough the key principles of external fixation have changed little over the years, there remains a significant amount of variation in fixation methods and postoperative care. In particular, use and management of halfpins intended for prolonged reconstruction are the subject of strong opinions and intense debate. Half-pins are commonly available in stainless steel and titanium. They are also available coated with hydroxyapatite (HA), which has been demonstrated to improve fixation strength and decrease rates of pin loosening. Despite this growing body of literature in support of HA-coated half-pins, there remains no standard practice. Regardless of type of half-pin used, there are many different methods of pin placement, with the main differences in technique being predrilling or no predrilling before half-pin placement and placement of the half-pin by hand or by power. Much of this argument stems from concern about thermal necrosis caused during half-pin placement, which many believe to be associated with subsequent pin loosening and pin-tract infections. Although some studies have reported pin-tract infection rates as high as 100%, there is little standardization in prevention or treatment. Surgeons use various methods of pin-site care to prevent infections; this care differs in both frequency (eg, daily, weekly) and procedure (eg, specific cleansing solution). Treatment ranges from use of parenteral or oral antibiotics to pin removal or, in extreme cases, frame removal. There is increasing interest in using circular fixation to treat acute and chronic injuries, and in the near future there likely will be an increase in the number of circular fixators being placed. However, there is a lack of consensus regarding both appropriate application and management of these external fixators. We conducted a study of common trends in use and management of half-pins and in treatment of pin-tract infections in circular fixation by polling subject matter experts, members of the Limb Lengthening and Reconstruction Society (LLRS).
منابع مشابه
Displacement Field Due to a Cylindrical Inclusion in a Thermoelastic Half-Space
In this paper, the closed form analytical expressions for the displacement field due to a cylindrical inclusion in a thermoelastic half-space are obtained. These expressions are derived in the context of steady-state uncoupled thermoelasticity using thermoelastic displacement potential functions. The thermal displacement field is generated due to differences in the coefficients of linear therma...
متن کاملEffect of Tool Shoulder and Pin Cone Angles in Friction Stir Welding using Non-circular Tool Pin
In friction stir welding frictional heat is generated by the rotating tool, sliding over the stationary plate along the weld centre. Tool being the only source of heat producing member, its geometrical design influences the heat generation rate. In this present work, effects of variation in tool shoulder and tool pin taper angles on thermal history during joining are analysed. Tools with triang...
متن کاملAnalytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding
In this work, effects of different tool pin profiles of flat and tapered shoulder geometries on the peak temperature in friction stir welding are investigated analytically. The developed models used for the analytical investigations considered the welding process as a combination or mixture of the pure sliding and the pure sticking. From the results, the amount of heat generation and the peak t...
متن کاملResearch on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink
The Performance of electric vehicle IGPT Pin fin heat sink can be measured by the temperature field and the fluid pressure and other parameters. In order to improve the cooling effect of Pin fin heat sink, diameter, length and distance of the fin was optimized combination. The relationship between pressure drop of the water inlet, outlet and pin fin parameters was analyzed and calculated. It wa...
متن کاملThe Effect of Post Material on Stress Distribution in Mandibular Second Premolar Tooth by Finite Element Analysis
Introduction: The restoration material commonly used as core material for pulpless posterior teeth is mostly amalgam due to its high strength and low cost and it can be used with or without pin. The aim of this study was to evaluate the influence of post material on stress distribution in mandibular second premolar tooth by finite element analysis. Method: The stress distribution was analyzed i...
متن کامل