Preparation, Characterization And Dielectric Properties Of The NiFe2O4/PMAs Hybrid Nanocomposite Film
نویسندگان
چکیده
In this study, PMAs/NiFe2O4 nanocomposite was prepared using in-situ polymerization technique. The structure and morphological properties of nano composited were determined via FT-IR, SEM, EDX analysis methods. Thermal properties of prepared nanocomposites were investigated by TGA, DTA and DSC. Pure NiFe2O4 nanoparticles were synthesized using hydrothermal synthesis using the same conditions without monomers and characterized with the same methods for comparison. Prepared nanocomposites are structurally stable over one year. This effective synthesis strategy gives good opportunity to prepare highly stable magnetic nanocomposites.
منابع مشابه
Organic Thin Film Transistors with Polyvinylpyrrolidone / Nickel Oxide Sol-Gel Derived Nanocomposite Insulator
Polyvinylpyrrolidone / Nickel oxide (PVP/NiO) dielectrics were fabricated with sol-gel method using 0.2 g of PVP at different working temperatures of 80, 150 and 200 ºC. Structural properties and surface morphology of the hybrid films were investigated by X- Ray diffraction (XRD) and Scanning Electron Microscope (SEM) respectively. Energy dispersive X-ray spec...
متن کاملPreparation and Characterization of a Bionanopolymer Film for Packaging Applications (a Case Study: Walnut Packaging)
The carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared by adding three levels of nanoclay particles (0.5, 1 and 3%) using solution casting evaporation method. The incorporation of nanoclay on mechanical, water vapor permeability, and oxygen barrier properties of CMC/PVA-based film was investigated. The best result was obtained through the nanocomposite film contain 3% nano...
متن کاملPreparation and characterization of a bionanopolymer film for walnut packaging
To apply the nanomaterial as a component in the packaging material structure, in this research, the carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared with three levels of nanoclay particles (0.5, 1 and 3%) using solution casting evaporation method. The incorporation of nanoclay on mechanical, water vapor permeability, and oxygen barrier properties of CMC/PVA-based film wa...
متن کاملPreparation and characterization of Montmorillonite/ZrO2 nanocomposite and its application for removal of Congo red
Montmorillonite/ZrO2 nanocomposites were prepared by the sol-gel method underultrasonic irradiation. The montmorillonite was incorporated into Zirconium gel. After stirring for 24 hr, the mixture was irradiated for 30 min under ultrasonic irradiation. The filtrated composite gel was calcinated at 400°C for 3h in furnace. The morphology of prepared catalysts was characterized by field emis...
متن کاملInvestigation and characterization of TiO2-TFC nanocomposite membranes; membrane preparation and UV studies
The purpose of this study was to compare the presence or absence of UV irradiation on the separation performance and morphology of the TiO2-assembled thin film membranes (in different concentrations). Furthermore, an attempt was made to show and compare the effect of the presence of TiO2 nanoparticles in aqueous and organic phases during the interfacial polymerization proc...
متن کامل