Stress Analysis of Switchover Module with Al6061-T6 and Al7075-T6 for Hybrid Locomotion Mobile Robot

نویسندگان

  • Khalid Hasnan
  • Aqeel Ahmed
چکیده

This study presents the design and stress analysis of mobile robot switchover module (track tensioner), which helps the robot to work in hybrid locomotion mechanism. The track tensioner is a loading and unloading module that helps the locomotion system transformability while robot moves either on wheel or track mechanism. The selection of suitable material for its design, the model is therefore analysed under static loading. It was analysed under static load of 200 N on two selected materials Aluminium alloys Al6061-T6 and Al7075-T6, to determine its mechanical behaviour of models. The results concluded that the material Aluminium alloy Al7075-T6 would be more suitable material for robot design as compared to Aluminium alloy Al6061-T6.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fretting fatigue life evaluation of multilayer Cr–CrN-coated Al7075-T6 with higher adhesion strength—fuzzy logic approach

In this research work, an experimental evaluation was conducted to explore the fretting fatigue life of multilayer Cr–CrN-coated AL7075-T6 alloy specimens with higher adhesion strength to substrate as the coating adhesion strength is one of the most critical issues in magnetron sputtering technique. Physical vapor deposition (PVD) magnetron sputtering technique was used for coating purpose, and...

متن کامل

The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy

In this research work, the influence of higher surface hardness on the fretting fatigue life of hard anodized aerospace AL7075-T6 alloy was investigated. An optimization of the parameters of hard anodized Al7075-T6 alloy to obtain higher surface hardness was presented. Confirmation test was carried out to show the improvement after using the best parameter combination attained from the optimiza...

متن کامل

High Velocity Impact Analysis on “Composite Material Block” Using FEM Approach

The failure of an AL6061-T6 and Kevlar-29 composite plate under high-velocity impact from an S-S (structural Steel) projectile tool was investigated using the nonlinear explicit finite element software, ANSYS AUTODYAN. Two velocity ranges 350 m/s and 700 m/s were used for FEM simulation. It was analyzed that AL6061-T6 is more resistant than KELVAR 29 at both ranges but Kevlar 29 is light in wei...

متن کامل

A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy

Aerospace applications and energy-saving strategies in general raised the interest and study in the field of lightweight materials, especially on aluminum alloys. Aluminum alloy itself does not have appropriate wear resistance. Therefore, improvement of surface properties is required in practical applications, especially when aluminum is in contact with other parts. In this work, first titanium...

متن کامل

Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy

Application of surface modification methods is expected to be a supreme solution to diminishing fretting damage. In this study, our aim was to improve the fretting fatigue life of Al7075-T6 alloy by covering it with a TiN thin film hard coating using the magnetron sputtering technique. Coated specimens with the best surface hardness, adhesion strength and roughness were tested with a rotating b...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016