Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at Barc

نویسندگان

  • Archana Sharma
  • Romesh Chandra
  • S. Mitra
  • Sandeep Singh
  • Vishnu Sharma
  • K. Senthil
  • Ankur Patel
  • S. R. Ghodke
  • A. Roy
  • P. C. Saroj
  • Ritu Agarwal
  • T. S. Kolge
  • Hitesh Choudhary
  • Ranjeet Kumar
  • M. Danish Beg
  • K. C. Mittal
  • L. M. Gantayet
چکیده

High current intense electron beams were investigated earlier for Flash X-rays and nuclear electromagnetic pulse generation. Starting with moderate parameters of 200 kV, 6 kA, 60 ns pulsed electron beam source from a system named Kilo Ampere Linear Injector (KALI-75) our latest development is KALI-30 GW system rated for 1 MV, 30 kA, 80 ns. First repetitive pulse LINAC without spark gap switching was developed as Linear Induction Accelerator (LIA-200) for technology demonstrations at 100 Hz. Also a repetitive Marx generator coupled reflex triode system to operate at 10 Hz. Next to this series of development LIA-400 has been developed to a capacity of 400 kV, 4 kA, 100 ns, 300 Hz. To make these pulse power systems applicable for big LINAC projects like nToF studies or ADS program, a high current electron gun has also been developed to give 100 A, 2 ns,10 Hz pulses.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

PROCESSING AND TESTING OF THE SRF PHOTOINJECTOR CAVITY FOR bERLinPro

The bERLinPro project is a compact, c.w. superconducting RF (SRF) energy recovery linac (ERL) that is being built to develop the accelerator physics and technology required to operate the next generation of high current ERLs. The machine is designed to produce a 50 MeV 100 mA beam, with better than 1 mm-mrad emittance. The electron source for the ERL will be a SRF photoinjector equipped with a ...

متن کامل

FIRST HORIZONTAL TEST RESULTS OF THE HZB SRF PHOTOINJECTOR FOR bERLinPro

The bERLinPro project, a small superconducting RF (SRF) c.w. energy recovery linac (ERL) is being built at Helmholtz-Zentrum Berlin in order to develop the technology required for operation of a high current, 100 mA, 50 MeV ERL. The electron source for the accelerator is a 1.4 cell SRF photoinjector fitted with a multi-alkali photocathode. As part of the HZB photoinjector development program th...

متن کامل

Phase I Energy Recovery Linac at Cornell

Cornell University, in collaboration with Jefferson Lab, has proposed a novel X-ray source based on the energy recovery linac (ERL) concept [1, 2]. Such a source will exceed the brightness of third generation synchrotron light facilities and will also allow ultra short X-ray pulses and variable pulse formats, to enhance existing, and promote new applications in X-ray science. A multi-GeV ERL sy...

متن کامل

The Slac Pulsed X-ray Facility*

The Stanford Linear Accelerator Center (SLAC) operates a high energy (up to 33 GeV) linear accelerator delivering pulses up to a few microseconds wide. The pulsed nature of the electron beam creates problems in the detection and measurement of radiation both from the accelerator beam and the klystrons that provide the RF power for the accelerator. Hence, a pulsed x-ray facility has been built a...

متن کامل

A 2 to 4 n m high power F E L on the S L A C linac *

We report the results of preliminary studies of a 2 to 4 nm SASE FEL, using a photoinjector to produce the electron beam, and the SLAC linac to accelerate it to an energy up to 10 GeV. Longitudinal bunch compression is used to increase ten fold the peak current to 2.5 kA, while reducing the bunch length to the subpicosecond range. The saturated output power is in the multi-gigawatt range, produ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015