The Velocity Control of the Electro-hydraulic Servo System

Abstract In general two basic methods are used for controlling the velocity of a hydraulic cylinder. First by an axial variable-displacement pump for controls flow to the cylinder. This configuration is commonly known as a hydrostatic transmission. Second by proportional valve powered by a constant-pressure source, such as a pressure compensated pump, drives the hydraulic cylinder. In this study, the electro-hydraulic servo system (EHSS) for velocity control of hydraulic cylinder is investigated experimentally and its analysis theoretically. Where the controlled hydraulic cylinder is altered by a swashplate axial piston pump or by proportional valve to achieve velocity control. The theoretical part includes the derivation of the mathematical model equations of combination system. Velocity control system for hydraulic cylinder using simple (PID) controller to get constant velocity range of hydraulic cylinder under applied external variable loads . An experimental set-up is constructed, which consists of the hydraulic test pump unit, the electro-hydraulic proportional valve unit, the hydraulic actuator unit , the external load control unit and interfacing electronic unit. The experimental results show that PID controller can be achieve good velocity control by variable displacement axial piston pump and also by proportional valve under external loads variations.