Evaluation of the control banding method--comparison with measurement-based comprehensive risk assessment.
نویسندگان
چکیده
The control banding method, or "control banding", is a simplified risk assessment system for chemical handling tasks. This system is supposed to provide assessment results of reasonable quality without expert involvement. The objective of this study was to evaluate the appropriateness of control banding judgment on the basis of workplace safety. A common approach for assessing workplace risk, which is called "comprehensive risk assessment" in this study, is to measure workers' exposure and compare it with relevant occupational exposure limits. Risk assessment was performed with control banding (COSHH Essentials, UK) at 12 workplaces of a petroleum company in Japan, where health risks had already been assessed separately through comprehensive risk assessment by experts and control technologies implemented accordingly. The obtained control banding judgments were then examined with regard to their adequacy by comparing them with existing control technologies. There was majority of cases (seven) where judgments by control banding were identified as "over-controlled"; there was no judgments identified as "under-controlled". Control banding also requested the seeking of expert advice in the majority of cases (eight). Thus, it was demonstrated that control banding tends to provide safe-sided judgment. A possible interpretation of this is that control banding is inherently designed to secure workplace safety by compensating for its insufficient exposure information with safe-sided judgment criteria and by requiring experts' intervention in high-risk cases. Control banding could be widely and effectively utilized in Japan, especially by employers in small enterprises, provided that the above characteristics are pre-acknowledged and health experts are made available. To this aim, it is essential to develop new local health experts and establish institutional mechanisms for facilitating employers' access to expert advice. It should however be noted that the number of workplaces evaluated in this study was small.
منابع مشابه
The effect of Curriculum Based Measurement (CBM) on math achievement of elementary students
Curriculum Based Measurement (CBM) is a supervision method of student’s educational achievement through direct assessment of predicted skills in the curriculum. Although almost half a century passes from the introduction of CBM in the world, however it has not been considered in Iranian curriculum. So, the aim of this research was to introduce and investigate the impact of CBM on math achieveme...
متن کاملطراحی و ارائه یک بسته نرمافزاری مبتنی بر روش Control Banding جهت ارزیابی ریسک مواجهه شغلی با نانومواد
Background and aims: The development of nanotechnology has result in the creation of new job opportunities and economic growth. But the lack of sufficient information about the toxicity and occupational exposure limits to nanomaterials on the toxicity and occupational exposure limits established nanomaterials always has created concerns. In this study design and providing of a simple software p...
متن کاملDeveloping a Method for Assessing and Managing the Risk of Covid-19; Rapid Covid-19 Hazard analysis
Background and aims: Work environments are constantly changing under the influence of various factors and newer risks are introduced. Rapid changes in science and technology, increasing the complexity of the industry, increased system integration and other factors have been shown to increase total risk in the past few decades. As well, risk management becomes increasingly critical in decreasing...
متن کاملThe Comparison of Two Models for Evaluation of Pre-internship Comprehensive Test: Classical and Latent Trait
Introduction: Despite the widespread use of pre-internship comprehensive test and its importance in medical students’ assessment, there is a paucity of the studies that can provide a systematic psychometric analysis of the items of this test. Thus, the present study sought to assess March 2011 pre-internship test using classical and latent trait models and compare their results. Methods: In th...
متن کاملThe analysis of hazard identification and risk assessment studies with the approach to assessing risk control measures since 2001 to 2017: A systemic review
Abstract background and aims: Nowadays the growing complexity of technology and industry has led to vast changes over the last few decades. These changes, in addition to their positive and valuable effects, have also caused industrial accidents affecting human life and the environment. According to the ILO 2011 report, there are 340 million annual workplace accidents and 160 million occupation...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of occupational health
دوره 49 6 شماره
صفحات -
تاریخ انتشار 2007