3 D Recovery Using Calibrated Active
نویسندگان
چکیده
In this contribution we describe a system to generate dense depth maps from image sequences recorded from a camera mounted on a robot. Two color images of the sequence are treated as a stereo pair. A color edge detector is applied, lines are segmented from the edge images, and approximations as sequences of straight lines and circular arcs are computed. An initial depth map results from lines of these compound segmentation objects. This map is reened to a dense map by a block matching algorithm. We describe results of a parallel implementation using object{oriented programming techniques. The results show substantial improvements in comparison to a monochromous system with respect to speed, accuracy, and completeness.
منابع مشابه
Investigation of the management scenarios for the aquifer recovery using mathematical modeling (Case study: Abarkuh aquifer)
Ground waters are considered as substantial water resources in many parts of the world especially in arid and semi-arid area such as Iran. The population growth, the intensive use ofsurface water and groundwater resources has often affected ground water levels. To meeting water management objectives it is essential to have a comprehensive study on the aquifer recharge and ground water withdrawa...
متن کاملFlow Re-Stabilizing Observation via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-volume Approach
The air-injection as an active flow stabilizing techniques, were numerically examined in current work, during the aerodynamic behavior and the characteristics of an axial compressor. At first, in design condition the characteristic curve was numerically captured for a specified test compressor. The computed results showed good agreements with those obtained from the experiments, to validate the...
متن کاملModeling and simulation of an active restoring mechanism for high reliability switches in RF-MEMS technology
We present a comprehensive study on a high reliability RF-MEMS switch with an active thermal recovery capability to counteract stiction. Applying finite element (FE) simulations we investigate the complete recovery process including mechanical, electrical, thermal and fluidic effects. The experimentally calibrated thermo-mechanical FE-model is used to extract key parameters of the recovery proc...
متن کاملMultiresolution approach based on projection matrices.
Active triangulation measurement systems with a rigid geometric configuration are inappropriate for scanning large objects with low measuring tolerances. The reason is that the ratio between the depth recovery error and the lateral extension is a constant that depends on the geometric setup. As a consequence, measuring large areas with low depth recovery error requires the use of multiresolutio...
متن کامل